Zobrazují se záznamy 839-858 z 880

    • TRACK GAUGE STABILITY UNDER EFFECT OF SLEEPER THERMAL EXPANSION 

      Autor: Lojda , Vít; Krejčiříková , Hana
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Railway sleepers are traditionally made of hardwood, pre-stressed concrete or steel. However, emerging advanced materials, including polymers or composites, are investigated for a possible employment in the sleeper production. ...
    • TRACKING DOWN LOCALIZED MODES IN PT-SYMMETRIC HAMILTONIANS UNDER THE INFLUENCE OF A COMPETING NONLINEARITY 

      Autor: Bagchi , Bijan; Modak , Subhrajit; Panigrahi K., Prasanta
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      The relevance of parity and time reversal (PT)-symmetric structures in optical systems has been known for some time with the correspondence existing between the Schrödinger equation and the paraxial equation of diffraction, ...
    • TRANSITION METAL OXIDES AS MATERIALS FOR ADDITIVE LASER MARKING ON STAINLESS STEEL 

      Autor: Mihalev Stoyanov, Mihail
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The product information plays an important role in the improvement of the manufacturing, allowing the tracking of the part through the full life cycle. Laser marking is one of the most versatile techniques for this purpose. ...
    • Transonic Flow of Wet Steam — Numerical Simulation 

      Autor: Halama , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      The paper presents a numerical simulation of the transonic flow of steam with a non-equilibrium phase change. The flow of steam is approximated by a mixture model complemented by transport equations for moments. Proper ...
    • TREATMENT OF NATURAL GAS BY ADSORPTION OF CO2 

      Autor: Hádková , Kristýna; Tekáč , Viktor; Ciahotný , Karel; Beňo , Zdeněk; Vrbová , Veronika
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Apart from burning, one of the possible uses of natural gas is as a fuel for motor vehicles. There are two types of fuel from natural gas — CNG (Compressed Natural Gas) or LNG (Liquefied Natural Gas). Liquefaction of natural ...
    • TRIAXIAL COMPRESSIVE STRENGTH OF ULTRA HIGH PERFORMANCE CONCRETE 

      Autor: Sovják , Radoslav; Vogel , Filip; Beckmann , Birgit
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      The aim of this work is to describe the strength of Ultra High Performance Concrete (UHPC) under triaxial compression. The main goal is to find a trend in the triaxial compressive strength development under various values ...
    • TUNNEL PORTAL INSTABILITY IN LANDSLIDE AREA AND REMEDIAL SOLUTION: A CASE STUDY 

      Autor: Farhadi Ayoublou , Farhad; Taromi , Majid; Eftekhari , Abbas
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      The construction of tunnel portals in mountainous or slope areas often involves problems, which are closely related to factors, such as slope topography, geology, geotechnics, construction geometry and the tunnel excavation ...
    • TWO-DIMENSIONAL HYBRIDS WITH MIXED BOUNDARY VALUE PROBLEMS 

      Autor: Szajewska , Marzena; Tereszkiewicz , Agnieszka
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Boundary value problems are considered on a simplex F in the real Euclidean space R2. The recent discovery of new families of special functions, orthogonal on F, makes it possible to consider not only the Dirichlet or ...
    • Ultra Low Dispersion Spectroscopy with Gaia and Astronomical Slitless Surveys 

      Autor: Hudec , R.; Hudec , L.; Klíma , M.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      The ultra-low dispersion spectroscopy to be applied in the ESA Gaia space observatory and the ground-based objective-prism plate surveys represent a similar type of astrophysical data. Although the dispersion in plate ...
    • ULTRA-HIGH-PERFORMANCE FIBRE-REINFORCED CONCRETE UNDER HIGH-VELOCITY PROJECTILE IMPACT - PART 2. APPLICABILITY OF PREDICTION MODELS 

      Autor: Kravanja , Sebastjan; Sovják , Radoslav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      Semi-infinite targets of Ultra-High-Performance Fibre-Reinforced Concrete with various fibre volume fractions were subjected to the high-velocity projectile impact using in-service bullets. In this study, a variety of ...
    • ULTRA-HIGH-PERFORMANCE FIBRE-REINFORCED CONCRETE UNDER HIGH-VELOCITY PROJECTILE IMPACT. PART I. EXPERIMENTS 

      Autor: Kravanja , Sebastjan; Sovják , Radoslav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      A series of cratering experiments were performed where the response of the Ultra-High-Performance Fibre-Reinforced Concretes with various fibre volume fractions to the high- velocity projectile impact loading was investigated. ...
    • ULTRAHIGH ENERGY COSMIC RAYS: REVIEW OF THE CURRENT SITUATION 

      Autor: Stanev, Todor
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      We describe the current situation of the data on the highest energy particles in the Universe – the ultrahigh energy cosmic rays. The new results in the field come from the Telescope Array experiment in Utah, U.S.A. For ...
    • ULTRASONIC SOLDERING OF Cu AND Al2O3 CERAMICS BY USE OF Bi-La AND Bi-Ag-La SOLDERS 

      Autor: Koleňák , Roman; Prach , Michal; Kostolný , Igor
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      This work deals with the effect of solder alloying with a small amount of lanthanum on joint formation with metallic and ceramic substrate. The Bi-Ag – based solder with 2 wt.% lanthanum addition and Bi solder with 2 wt.% ...
    • UNDERGROUND AIR DUCT TO CONTROL RISING MOISTURE IN HISTORIC BUILDINGS: IMPROVED DESIGN AND ITS DRYING EFFICIENCY 

      Autor: Pazderka , Jiří; Hájková , Eva; Jiránek , Martin
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The underground air ducts along peripheral walls of a building are a remediation method, which principle is to enable an air flow along the moist building structure’s surface to allow a sufficient evaporation of moisture ...
    • UNSTEADY FLOW OF THIXOTROPIC COLLAGEN SUBSTANCE IN PIPES 

      Autor: Žitný , Rudolf; Landfeld , Aleš; Skočilas , Jan; Štancl , Jaromír; Flegl , Vlastimil; Houška , Milan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Unsteady flow of thixotropic liquid in pipes is solved by 1D and 2D numerical methods using the same constitutive equation — the only difference is in the radial diffusion of the structural parameter. Comparison shows that ...
    • UPDATED VERSION OF THE SIMPLIFIED MODEL OF INTENSIVELY BLASTED ELECTRIC ARC 

      Autor: Senk , Josef; Laznickova , Ilona; Jakubova , Ivana
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      The article deals with an improvement of a simplified model of intensively blasted electric arc burning in argon in an anode channel of a modular-type arc heater. Gradually gained experience in the application of the model ...
    • USE OF DISC SPRINGS IN A PELLET FUEL MACHINE FOR PRESSURE REGULATION AND PREVENTION OF DAMAGE 

      Autor: Çelik , İsmet; Güneş Can, Ebubekir
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2017)
      The use of biomass fuel pellets is becoming widespread as a renewable and environment-friendly energy. Pellet fuels are produced in various pellet machine types. Pellet machines encounter problems such as pressure ...
    • Use of Grasses and Mixtures of Grasses for Energy Purposes 

      Autor: Andert , David; Frydrych , Jan; Gerndtová , Ilona
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2012)
      As levels of agricultural productivity increase, there is also an increase in land area not utilized for food production. This area can be used for growing energy crops, including grasses. When land is set aside for grassing, ...
    • Use of thermal analysis for the detection of calcium oxalate in selected forms of plastering exposed to the effects of Serpula lacrymans 

      Autor: Cígler Žofková, Drahomíra; Frankl, Jiří; Frankeová, Dita
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The article discusses the interaction of metabolic products of a wood-destroying fungus of the dry rot species (Serpula lacrymans (Wulfen) P. Karst.) with a commonly used lime mortar. Mortar samples used in the presented ...
    • USING PHOTOPLETHYSMOGRAPHY IMAGING FOR OBJECTIVE CONTACTLESS PAIN ASSESSMENT 

      Autor: Koeny , Marcus; Blanik , Nikolai; Yu , Xinchi; Czaplik , Michael; Walter , Marian; Rossaint , Rolf; Blazek , Vladimir; Leonhardt , Steffen
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      This work presents an extension to the known Analgesia Nociception Index (ANI), which provides an objective estimation of the current depth of analgesia. An adequate “measure” would facilitate so-called balanced anesthesia. ...