Zobrazují se záznamy 159-178 z 880

    • Classification of Variable Objects for Search for GRB Candidates on Bamberg Photographic Plates 

      Autor: Hudec , René; Kopel , Fabian; Macsics , Robert; Hadwige , Markus; Heber , Ulrich; Cayé , Walter
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      We report on an ongoing study based on blink-comparison of more than 5000 Bamberg Observatory Southern Sky Patrol Plates performed within a continuation of a student high school project (Jugend Forscht). After a detailed ...
    • Clock Math — a System for Solving SLEs Exactly 

      Autor: Hladík , Jakub; Lórencz , Róbert; Šimeček , Ivan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      In this paper, we present a GPU-accelerated hybrid system that solves ill-conditioned systems of linear equations exactly. Exactly means without rounding errors due to using integer arithmetics. First, we scale floating-point ...
    • CO2 power cycle chemistry in the CV Řež experimental loop 

      Autor: Berka, Jan; Ballek, Jakub Vojtěch; Velebil, Ladislav; Purkarová, Eliška; Vagenknechtová, Alice; Hlinčík, Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      Power cycles using carbon dioxide in a supercritical state (sc-CO2) can be used in both the nuclear and non-nuclear power industry. These systems are characterized by their advantages over steam power cycles, e. g., the ...
    • COMMON CROSSING CONDITION MONITORING WITH ON BOARD INERTIAL MEASUREMENTS 

      Autor: Sysyn, Mykola; Nabochenko, Olga; Gerber, Ulf; Kovalchuk, Vitalii; Petrenko, Oleksiy
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      A railway turnout is an element of the railway infrastructure that influences the reliability of a railway traffic operation the most. The growing necessity for the reliability and availability in the railway transportation ...
    • COMPARATIVE MEASUREMENTS OF HEAD ANGULAR MOVEMENTS USING A CAMERA SYSTEM AND A GYROSCOPE SYSTEM 

      Autor: Socha , Vladimir; Kutilek , Patrik; Cakrt , Ondrej; Cerny , Rudolf
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2014)
      Assessments of body-segment angular movements are very important in the rehabilitation process. Head angular movements are measured and analyzed for use in studies of stability and posture. However, there is no methodology ...
    • COMPARATIVE STUDY AND EMPIRICAL MODELLING OF PULVERIZED COCONUT SHELL, PERIWINKLE SHELL AND PALM KERNEL SHELL AS A POZZOLANS IN CONCRETE 

      Autor: Ikponmwosa , Efe Ewaen; Ehikhuenmen , Samuel Onosedeba; Irene , Karieren Kate
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      Infrastructural development across the world is fast growing due to the rapid growth in population. This has resulted in consequently creating an increase in the demand for construction materials, especially cement. This ...
    • Comparative study of state space averaging and PWM with extra element theorem techniques for complex cascaded DC-DC Buck converter 

      Autor: Shete, Sangeeta; Joshi, Prasad
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2023)
      Until now, most commonly used state space averaging and PWM techniques have been applied to different converter topologies and their advantages and disadvantages were stated. However, the superiority of an analytical ...
    • Comparision of the walk techniques for fitness state space analysis in vehicle routing problem 

      Autor: Agárdi, Anita; Kovács, László; Bányai, Tamás
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The Vehicle Routing Problem (VRP) is a highly researched discrete optimization task. The first article dealing with this problem was published by Dantzig and Ramster in 1959 under the name Truck Dispatching Problem. Since ...
    • COMPARISON BETWEEN 2D TURBULENCE MODEL ESEL AND EXPERIMENTAL DATA FROM AUG AND COMPASS TOKAMAKS 

      Autor: Ondac , Peter; Horacek , Jan; Seidl , Jakub; Vondrácek , Petr; Müller Werner, Hans; Adámek , Jirí; Nielsen Henry, Anders
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      In this article we have used the 2D fluid turbulence numerical model, ESEL, to simulate turbulent transport in edge tokamak plasma. Basic plasma parameters from the ASDEX Upgrade and COMPASS tokamaks are used as input for ...
    • COMPARISON OF ACTUAL GROUND SETTLEMENTS IN TUNNELLING EXCAVATION TO MODEL PREDICTIONS 

      Autor: Saplachidi , Alexandra; Vougioukas , Emmanouil
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2018)
      It has been discovered that the underground structures are vulnerable to seismic phenomena mainly due to permanent ground deformations caused by earthquakes rather than the dynamic seismic movement itself. Several models ...
    • COMPARISON OF AXIAL FAN ROTOR EXPERIMENTAL DATA WITH CFD SIMULATION 

      Autor: Prachař , Aleš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Data obtained from an experimental simulation on a new test rig for axial fans are compared to a CFD simulation. The Edge solver is used and the development needed for the simulation (boundary conditions, free stream ...
    • COMPARISON OF CLASSICAL AND INTERACTIVE MULTI-ROBOT EXPLORATION STRATEGIES IN POPULATED ENVIRONMENTS 

      Autor: Kalde , Nassim; Simonin , Olivier; Charpillet , François
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Multi-robot exploration consists in coordinating robots for mapping an unknown environment. It raises several issues concerning task allocation, robot control, path planning and communication. We study exploration in ...
    • COMPARISON OF COOLING SCHEMES FOR HIGH HEAT FLUX COMPONENTS COOLING IN FUSION REACTORS 

      Autor: Domalapally , Phani Kumar; Entler , Slavomir
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Some components of the fusion reactor receives high heat fluxes either during the startup and shutdown or during the operation of the machine. This paper analyzes different ways of enhancing heat transfer using helium and ...
    • COMPARISON OF ENERGY FLOW STREAM AND ISENTROPIC METHOD FOR STEAM TURBINE ENERGY ANALYSIS 

      Autor: Blažević , Sebastijan; Mrzljak , Vedran; Anđelić , Nikola; Car , Zlatan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      In this paper, a comparison of two different methods for a steam turbine energy analysis is presented. A high-pressure steam turbine from a supercritical thermal power plant (HPT) was analysed at three different turbine ...
    • COMPARISON OF EXPLORATION STRATEGIES FOR MULTI-ROBOT SEARCH 

      Autor: Kulich , Miroslav; Juchelka , Tomáš; Přeučil , Libor
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Searching for a stationary object in an unknown environment can be formulated as an iterative procedure consisting of map updating, selection of a next goal and navigation to this goal. It finishes when the object of ...
    • COMPARISON OF MATHEMATICAL MODELS FOR HEAT EXCHANGERS OF UNCONVENTIONAL CHP UNITS 

      Autor: Durcansky , Peter
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      An unconventional CHP unit with a hot air engine is designed as the primary energy source with fuel in the form of biomass. The heat source is a furnace designed for combustion of biomass, whether in the form of wood logs ...
    • COMPENSATION OF SPRINGBACK IN LARGE SHEET METAL FORMING 

      Autor: Pačák , Tomáš; Tatíček , František; Valeš , Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2019)
      A precise production of sheet metal parts has always been a main goal in press shops. Highest quality demands are required especially in automotive production. Unfortunately, even today, the production is not optimal due ...
    • Complex Covariance 

      Autor: Kleefeld , Frieder
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2013)
      According to some generalized correspondence principle the classical limit of a non-Hermitian quantum theory describing quantum degrees of freedom is expected to be the well known classical mechanics of classical degrees ...
    • Complex topological soliton with real energy in particle physics 

      Autor: Taira, Takanobu
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2022)
      We summarise the procedure used to find the classical masses of Higgs particle, massive gauge boson and t’Hooft-Polyakov monopole in non-Hermitian gauge field theory. Their physical regions are explored, and the mechanism ...
    • COMPLEXITY REDUCTION OF CYCLOSTATIONARY SENSING TECHNIQUE USING IMPROVED HYBRID SENSING METHOD 

      Autor: Abdullah , Hikmat N.; Dawood , Zinah O.; Abdelkareem , Ammar E.; Abed , Hadeel S.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2020)
      In cognitive radio system, the spectrum sensing has a major challenge in needing a sensing method, which has a high detection capability with reduced complexity. In this paper, a low-cost hybrid spectrum sensing method ...