Zobrazit minimální záznam



dc.contributor.authorOyesola, Moses
dc.contributor.authorMpofu, Khumbulani
dc.contributor.authorDaniyan, Ilesanmi
dc.contributor.authorMathe, Ntombi
dc.date.accessioned2023-01-19T10:17:22Z
dc.date.available2023-01-19T10:17:22Z
dc.date.issued2022
dc.identifier.citationActa Polytechnica. 2022, vol. 62, no. 6, p. 639-653.
dc.identifier.issn1210-2709 (print)
dc.identifier.issn1805-2363 (online)
dc.identifier.urihttp://hdl.handle.net/10467/106427
dc.description.abstractIn evaluating emerging technology, such as additive manufacturing, it is important to analyse the impact of the manufacturing process on efficiency in an objective and quantifiable manner. This study deals with the design and simulation of a bearing housing made from titanium alloy (Ti6Al4V) using the selective laser melting (SLM) technique. The Finite Element Analysis (FEA) method was used for assessing the suitability of Ti6Al4V for aerospace application. The choice of Ti6Al4V is due to the comparative advantage of its strength-to-weight ratio. The implicit and explicit modules of the Abaqus software were employed for the non-linear and linear analyses of the component part. The results obtained revealed that the titanium alloy (Ti6Al4V) sufficiently meets the design, functional and service requirements of the bearing housing component produced for aerospace application. The designed bearing is suitable for a high speed and temperature application beyond 1900 K, while the maximum stress induced in the component during loading was 521 kPa. It is evident that the developed stresses do not result in a distortion or deformation of the material with yield strength in the region of 820 MPa. This work provides design data for the development of a bearing housing for AM under the technique of SLM using Ti6Al4V by reflecting the knowledge of the material behaviour under the operating conditions.en
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.publisherČeské vysoké učení technické v Prazecs
dc.publisherCzech Technical University in Pragueen
dc.relation.ispartofseriesActa Polytechnica
dc.relation.urihttps://ojs.cvut.cz/ojs/index.php/ap/article/view/8129
dc.rightsCreative Commons Attribution 4.0 International Licenseen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.titleDesign and simulation of a bearing housing aerospace component from titanium alloy (Ti6Al4V) for additive manufacturing
dc.typearticleen
dc.date.updated2023-01-19T10:17:22Z
dc.identifier.doi10.14311/AP.2022.62.0639
dc.rights.accessopenAccess
dc.type.statusPeer-reviewed
dc.type.versionpublishedVersion


Soubory tohoto záznamu



Tento záznam se objevuje v následujících kolekcích

Zobrazit minimální záznam

Creative Commons Attribution 4.0 International License
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je Creative Commons Attribution 4.0 International License