ČVUT DSpace
  • Search DSpace
  • Čeština
  • Login
  • Čeština
  • Čeština
View Item 
  •   ČVUT DSpace
  • Czech Technical University in Prague
  • Faculty of Electrical Engineering
  • Department of Circuit Theory
  • Master Theses - 13131
  • View Item
  • Czech Technical University in Prague
  • Faculty of Electrical Engineering
  • Department of Circuit Theory
  • Master Theses - 13131
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Měření parametrů srdečních katetrů

Measurement of Heart Catheter Parameters

Type of document
diplomová práce
master thesis
Author
Yegor Mikhailov
Supervisor
Fabián Vratislav
Opponent
Grošpic Antonín
Field of study
Biomedicínské inženýrství
Study program
Biomedicínské inženýrství a informatika
Institutions assigning rank
katedra teorie obvodů



Rights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.html
Vysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item record
Abstract
Diplomová práce se věnuje studiu fyzikálně-matematického modelu měřicího systému "srdeční diagnostický katétr - komůrka se senzorem tlaku", a to na základě měření frekvenční charakteristiky reálného systému. V úvodní části práce byl proveden teoretický rozbor problematiky hemodynamického monitorování a fyzikálně-matematického aparátu použitého pro modelování a verifikaci modelu. V rámci seznámení se současným stavem řešení problematiky bylo provedeno studium výzkumů M. Gardnera a Roberta A. Peury. Tato část práce zahrnuje popis problematiky a metody řešení vědeckých článků, které se staly základem pro řešení experimentální úlohy diplomové práce -měření frekvenční charakteristiky systému. Praktická část práce zahrnuje analýzu modelu s rozloženými parametry a modelu se soustředěnými parametry měřicího systému "katétr-snímač". V experimentální části práce byly popsány návrh a realizace metod měření frekvenční a přechodové charakteristiky systému. Ze signálů naměřených v obou experimentech byly stanoveny hodnoty poměrného útlumu a vlastní frekvence systému. Pro určení parametrů byly testovány tři metody: numerický výpočet - funkce tfest Matlab, "Half-power bandwidth method " a výpočet pro lineární model II. řádu podle Webstera. Na základě identifikovaných parametrů byla stanovena přenosová funkce systému. Získaná přenosová funkce byla použita pro vytvoření digitálního kompenzačního FIR filtru. Pro hodnocení výsledků inverzní filtrace byly použity korelační koeficient a parametr "Root Mean Square Error".
 
The diploma thesis deals with the study of the physical-mathematical model of the measuring system "cardiac diagnostic catheter - dome with pressure sensor", based on the measurement of the frequency response of the real system. The introductory part of the thesis includes theoretical analysis for issues of hemodynamic monitoring and physical-mathematical apparatus, which were used for modeling and verification of the model. By way of introduction to the current state of solution, there were two studies considered by M. Gardner and Robert A. Peura. This part of the thesis includes a description of the issue and the solution methods of scientific articles, which became the main solution for the experimental task of the thesis - measuring the frequency response of the system. The practical part of the thesis includes the analysis of the distributed parameter model and the lumped parameter model of the "catheter-sensor" measuring system. The proposal and implementation of methods for measuring the frequency and step response of the system were described in the experimental section of the thesis. The damping ratio and natural frequency values of the system were determined from the signals measured in both experiments. Three methods were used to determine the parameters: numerical calculation - tfest function Matlab, "Half-power bandwidth method" and calculation for II. order linear model according to Webster. The transfer function of the system was determined on the basis of identified parameters. The obtained transfer function was used to create a digital compensation FIR filter. The correlation coefficient and the "Root Mean Square Error" parameter were used to evaluate the results of inverse filtering.
 
URI
http://hdl.handle.net/10467/83302
View/Open
PLNY_TEXT (4.720Mb)
POSUDEK (1.208Mb)
POSUDEK (158.3Kb)
Collections
  • Diplomové práce - 13131 [141]

České vysoké učení technické v Praze copyright © 2016 

DSpace software copyright © 2002-2016  Duraspace

Contact Us | Send Feedback
Theme by 
@mire NV
 

 

Useful links

CTU in PragueCentral library of CTUAbout CTU Digital LibraryResourcesStudy and library skillsResearch support

Browse

All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

My Account

Login

České vysoké učení technické v Praze copyright © 2016 

DSpace software copyright © 2002-2016  Duraspace

Contact Us | Send Feedback
Theme by 
@mire NV