Porovnání anténních elementů s použitím virtuálního modelu reálného pacienta
Comparison of antenna elements by using a virtual model of a real patient
Typ dokumentu
bakalářská prácebachelor thesis
Autor
Tamerlan Tahir Oglu Yusifov
Vedoucí práce
Vrba David
Oponent práce
Merunka Ilja
Studijní obor
Biomedicínský technikStudijní program
Biomedicínská a klinická technika (studium v angličtině)Instituce přidělující hodnost
katedra biomedicínské technikyPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
In this bachelor work, a virtual model of a real patient which was previously created by Materilize Mimmics software was used to compare different hyperthermic applicators (Dipole, wave guide and metamaterial) in terms of electrical efficiency, sensitivity of adaptation to changes in the dielectric properties and ability to focus electromagnetic power to the treated area. All the simulations were made with an aid of COMSOL Multiphysics software, where the models of the applicators were made. The first task was done by changing relative permittivity of muscle layer of the model and comparing S11 parameter values and the second one was done by applying 1400 W to the model and measuring resulting specific absorption rate (SAR) value. The result of the experiment showed us that tumor cell absorbed the highest energy in the simulation with wave guide and metamaterial applicators, the resulting SAR values were the highest. The difference in between these two applicators is barely noticeable. Whereas the relative permittivity did not have much of an impact on S11 parameter value in any of simulations of applicators. In this bachelor work, a virtual model of a real patient which was previously created by Materilize Mimmics software was used to compare different hyperthermic applicators (Dipole, wave guide and metamaterial) in terms of electrical efficiency, sensitivity of adaptation to changes in the dielectric properties and ability to focus electromagnetic power to the treated area. All the simulations were made with an aid of COMSOL Multiphysics software, where the models of the applicators were made. The first task was done by changing relative permittivity of muscle layer of the model and comparing S11 parameter values and the second one was done by applying 1400 W to the model and measuring resulting specific absorption rate (SAR) value. The result of the experiment showed us that tumor cell absorbed the highest energy in the simulation with wave guide and metamaterial applicators, the resulting SAR values were the highest. The difference in between these two applicators is barely noticeable. Whereas the relative permittivity did not have much of an impact on S11 parameter value in any of simulations of applicators.
Kolekce
- Bakalářské práce - 17110 [869]