Zpracování STL dat pro potřeby reverzního inženýrství
STL data processing for reverse engineering purposes
Type of document
diplomová prácemaster thesis
Author
Jan Jindra
Supervisor
Pelikán Lukáš
Opponent
Trubelová Šárka
Field of study
Bez specializaceStudy program
Výrobní inženýrstvíInstitutions assigning rank
ústav technologie obrábění, projektování a metrologieRights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item recordAbstract
Tato diplomová práce obecně popisuje reverzní inženýrství, jeho historii, oblasti využití, důvody využití a výhody. Dále popisuje části a možnosti celého procesu reverzního inženýrství. Řeší problematiku práce s STL modely od nahrání modelu po úpravy, mezi které patří i parametrizace STL modelu. Představuje programy používané reverzním inženýrstvím k práci s těmito modely. Ke konci teoretické části nastiňuje problematiku konstrukční optimalizace, zejména optimalizaci ergonomie. Pro praktickou část byl obdržen naskenovaný model trysky, který byl upravován třemi různými programy. Výsledkem bylo závěrečné porovnání programů z hlediska dostupnosti, pracovního rozhraní, možností importu a exportu, funkcí a konečného výsledku úprav. This thesis generally describes reverse engineering, its history, areas and reasons for use and benefits. It also describes the parts and possibilities of the whole process of reverse engineering. It solves the problem of working with STL models from model loading to editing, which includes parameterization of the STL model. Thesis introduces programs used by reverse engineering to work with these models. Towards the end of the theoretical part, it outlines the issue of design optimization, especially the optimization of ergonomics. For the practical part, a scanned model of the nozzle was obtained, which was modified by three different programs. The result was a final comparison of programs in terms of availability, working interface, import and export options, functions and the final result of modifications.
Collections
- Diplomové práce - 12134 [245]