Rozdíly výšek v systémech Bpv a EGM96 na základě modelů kvazigeoidu CR2005 a QGZÚ-2013 a dat GNSS-nivelace
Height differences of height systems Bpv and EGM96, based on the quasigeoid models CR2005 and QGZÚ-2013 and GNSS-levelling data
Type of document
diplomová prácemaster thesis
Author
Zuzana Vaňková
Supervisor
Holešovský Jan
Opponent
Sebera Josef
Field of study
GeomatikaStudy program
Geodézie a kartografieInstitutions assigning rank
Katedra geomatikyRights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item recordAbstract
Tato práce se zabývá výškovými systémy Bpv a EGM96. Vznikla za účelem zjistit rozdíl výšek pro ČR mezi těmito systémy pro potřeby civilního letectví. Výpočet výškového rozdílu je realizován jako rozdíl odlehlosti geoidu a výškové anomálie kvazigeoidu, kde obě veličiny jsou vztaženy ke stejnému referenčnímu elipsoidu. Práce se z velké části věnuje právě určení odlehlosti geoidu, kde tvar této plochy je zjištěn pomocí výpočtu velikosti průvodiče ze sady Stokesových koeficientů pro model EGM96. Modely kvazigeoidu CR-2005 a QGZÚ-2013, které jsou v této práci pro výpočet rozdílů využity, jsou popsány hodnotami výškové anomálie v pravidelné síti. Další možností výpočtu výškových rozdílů, kterému se práce pro kontrolu věnuje, je určení rozdílů pomocí souboru bodů výběrové údržby ZÚ. Tyto body mají měřenou elipsoidickou výšku metodou GNSS a také nivelovanou výšku v Bpv. Prostřednictvím těchto hodnot je na nich možno určit výškovou anomálii a pomocí ní poté opět rozdíl výšek. Práce se věnuje také vzájemnému porovnání jednotlivých výsledků. Výškové rozdíly jsou ztvárněny jako kartografický výstup (mapa rozdílů výšek pro ČR). This diploma thesis deals with height systems Bpv and EGM96. It was created in order to determine the height differences for the Czech Republic in these systems for the needs of civil aviation. The calculation of this difference is realized as the difference between the geoidal undulation and the height anomaly of the quasigeoid from the same reference ellipsoid. The work is largely devoted to determining the undulation of the geoid, where the shape of this surface is determined by calculating the size of the radius vector from a set of Stokes coefficients for the model EGM96. The quasigeoid models CR2005 and QGZÚ-2013, which are used in this work to calculate the differences, are described by the values of the height anomaly in the regular grid. Another calculation method is to determine the differences using a set of selective maintenance points. These points have a measured ellipsoidal height using the GNSS method and also a normal height in Bpv. Thus, it is possible to determine the height anomaly for them and then also compare it with the undulation of the geoid. The results of the work, which are the calculated differences, are presented as a cartographic output (maps of height differences for the Czech Republic) and compared with each other.
Collections
- Diplomové práce - 11155 [153]
Related items
Showing items related by title, author, creator and subject.
-
O determinizaci zásobníkových automatů a konverzi regulárních stromových výrazů na determinizovatelné zásobníkové automaty
Author: Radomír Polách; Supervisor: Janoušek Jan; Opponent: Meduna Alexander
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2019-05-30)Trees are one of the fundamental and well-studied data structures in Computer Science. Arbology uses pushdown automata (PDAs), which read linearised notations of trees, as its suitable model of computation. Regular tree ... -
Konstrukce zásobníkového automatu přijímajícího jazyk daný regulárním stromovým výrazem
Author: Pecka Tomáš; Supervisor: Trávníček Jan; Opponent: Polách Radomír
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2016-05-09)Tato práce studuje regulárni stromové výrazy, formalismus pro popis regulárnich stromových jazyků. Hlavnim přinosem práce je nový algoritmus pro převod regulárniho stromového výrazu na ekvivalentni zásobnikový automat, ... -
Určení výškových anomálií kvazigeoidu na profilu Těšovice - Zbytiny
Author: Pánková Sandra; Supervisor: Holešovský Jan; Opponent: Zeman Antonín
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2016-05-12)Diplomová práce se zabývá určením výškových anomálií vztažených k referenčnímu elipsoidu Geodetického referenčního systému 1980 - GRS80. Cílem práce je testování a srovnání modelů kvazigeoidu CR-2000, CR-2005 a QGZÚ-2013 ...