Možnosti integrace parní redukce v RC oběhu
Possibility of implementation of a steam reduction
Typ dokumentu
bakalářská prácebachelor thesis
Autor
Martin Zvěřina
Vedoucí práce
Funda Zdeněk
Oponent práce
Molnár Tomáš
Studijní obor
Energetika a procesní technikaStudijní program
StrojírenstvíInstituce přidělující hodnost
ústav energetikyPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Bakalářská práce „Možnosti Integrace točivé redukce v RC oběhu“ se zabývá návrhem parní točivé redukce do oběhu biomasové elektrárny. V teoretické části práce je popsán pojem „Parní točivá redukce“ společně s popsáním specifických konstrukčních prvků a opodstatněním jejího použití pro redukci parametrů páry. Součástí teoretické části je zároveň seznámení s technologií biomasové elektrárny a uvedení možných variant pro doplnění točivé redukce. Dále jsou představena dostupná technická řešení. Praktická část představuje samotný návrh doplnění točivé redukce jako pohon napájecího čerpadla do tepelného oběhu, který je definován provozními daty. Nejdříve je proveden výpočet všech potřebných hodnot v jednotlivých uzlech oběhu a následně je oběh upraven a v potřených uzlech přepočítán pro stav s doplněním točivé redukce. Výpočtová část je uzavřena jednoduchým ekonomickým posouzením. V samotném závěru je provedena diskuze výsledků a uvedení několika doporučení, která plynou z analýzy výsledků. The bachelor's thesis " Possibility of implementation of a steam reduction " deals with the design of steam rotary reduction in the technology of a biomass power plant. The theoretical part of the thesis describes the term "steam reduction" together with adescription of specific structural elements and justification of its use for the reduction of steam parameters. The theoretical part contains also description of the technology of biomass power plants and the introduction to possible variants of steam reduction implementations. The available technical solutions are also presented. The practical part presents the process of adding of a steam reduction as a feed pump drive to the technology, which is defined by operating data. First, the calculation of all required values in individual points of the thermodynamic cycle is performed, and then the cycle is adjusted and recalculated for adding of the steam reduction. The ending part of calculation is a simple economic analysis. In the end, there is a discussion of results and several recommendations.
Kolekce
- Bakalářské práce - 12115 [172]
Související záznamy
Zobrazují se záznamy příbuzné na základě názvu, autora a předmětu.
-
Vysokokapacitní akumulace elektrické energie z obnovitelných zdrojů
Autor: Ayman Anam; Vedoucí práce: Vodička Matěj; Oponent práce: Opatřil Jan
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2023-08-23)In today's conditions where energy supply is increasing day by day, it is unavoidable to turn to sustainable renewable energy sources to meet energy needs. This bachelor's thesis is dedicated to research on renewable energy ... -
Analysis of installation of small wind turbine on premises
Autor: Perez Maroto Luis; Vedoucí práce: Knápek Jaroslav; Oponent práce: Chmelík Tomáš
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2018-06-07)This project has three different ways of study, which explain the current situation of low wind power turbines. The first target is to explain one of the newest technologies in this sector called Vortex Wind collector, ... -
Diagnostika vad materiálů vodních turbin a jejich oprava
Autor: Martin Dolanský; Vedoucí práce: Suchánek Jan; Oponent práce: Pešek Ladislav
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2021-09-03)Bakalářská práce se zabývá diagnostikou vad materiálů vodních turbín a jejich opravou. Téma bylo zvoleno z důvodu mého zájmu o tuto technickou problematiku, jelikož je součástí náplně mého zaměstnání. Práce je rozdělena ...