A COMPARISON OF TWO MODAL ANALYSIS METHODS: AN IMPACT HAMMER VERSUS LASER VIBROMETRY
Typ dokumentu
articlePeer-reviewed
publishedVersion
Autor
Krejčí , Jakub
Beneš , Petr
Práva
Creative Commons Attribution 4.0 International Licensehttp://creativecommons.org/licenses/by/4.0/
openAccess
Metadata
Zobrazit celý záznamAbstrakt
This paper presents a comparative experimental-analytical study on the performance of Multi-Input Single-Output (MISO) and Single-Input Multi-Output (SIMO) techniques to identify the modal properties of a cantilever beam. A 2-D laser interferometry was employed to perform the SIMO modal test, while for the MISO test configuration, a conventional accelerometer was used to measure the response of the structure. Comparing the experimentally-measured natural frequencies with those calculated by the FEM model, a maximum difference of 4% between natural frequencies was observed. The repeatability of both techniques is also investigated in this paper and it is shown that the difference between modal properties identified under different operators is less than 0.5% for both the MISO and SIMO techniques.
Kolekce
K tomuto záznamu jsou přiřazeny následující licenční soubory:
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je Creative Commons Attribution 4.0 International License