Shell house
Shell house
Typ dokumentu
diplomová prácemaster thesis
Autor
David Tomášek
Vedoucí práce
Frantová Michaela
Oponent práce
Černý Tomáš
Studijní obor
Konstrukce pozemních stavebStudijní program
Stavební inženýrstvíInstituce přidělující hodnost
katedra betonových a zděných konstrukcíPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Předmětem diplomové práce je návrh a posouzení konstrukce netradičního tvaru v seizmicky aktivní oblasti s využitím platných českých norem, návrh výztuže vybraných konstrukčních prvků a koncepční návrh způsobu výstavby. Jsou zde řešeny problémy působení větru na oválnou konstrukci nepravidelného půdorysu, způsob uvážení zatížení teplotou na částech konstrukce vystavených vnějším vlivům a přístup k zatížení seizmicitou včetně výpočtu jeho vlivu. Dále se práce věnuje způsobu modelování konstrukce a samotnému návrhu a posouzení konstrukce. Je zde popsáno, jakým způsobem bylo přistoupeno k návrhu a posouzení výztuže na oválných částech konstrukce s proměnnou tloušťkou, a s jakými problémy se bylo nutné při návrhu výztuže vypořádat. Na závěr je rozebrán koncepční návrh výstavby – jsou zde uvedeny požadavky na beton a na bednění, které budou při výstavbě vyžadovány, navrhnuty dvě možné varianty postupu výstavby a zhodnocení jejich kladů a záporů. Pro výpočet návrhových vnitřních sil a posouzení konstrukce byl vytvořen celkový 3D model konstrukce v programu SCIA Engineer 19.1 společně s dílčími kontrolními modely. Návrh výztuže a posouzení na mezní stavy únosnosti a použitelnosti jsou provedeny ručními návrhovými metodami za současného použití programu MS Excel. The subject of the diploma thesis is the design and assessment of the structure of non-traditional shape in a seismically active area using valid Czech standards, design of reinforcement of selected structural elements and conceptual design of the method of construction. The problems of wind action on an oval structure with an irregular floor plan, the method of considering the temperature load on parts of the structure exposed to external influences and the approach to the load by seismicity, including the calculation of its influence, are solved here. Furthermore, the work deals with the method of modelling the structure and the design and assessment of the structure. It describes how the design and assessment of reinforcement was approached on oval parts of the structure with variable thickness, and what problems had to be dealt with when designing reinforcement. Finally, the conceptual design of the construction is discussed - there are requirements for concrete and formwork, which will be required during construction and two possible variants of the construction process and evaluation of their pros and cons. An overall 3D model of the structure was created in SCIA Engineer 19.1 together with partial control models to calculate the design internal forces and assess the structure. Reinforcement design and assessment for ultimate strength and serviceability are performed by manual design methods using MS Excel.
Kolekce
- Diplomové práce - 11133 [460]