Vsřikování zkušebního tělesa pro tahovou zkoušku
Injection of test specimen for tensile test
Typ dokumentu
diplomová prácemaster thesis
Autor
Santhosh Reddy Bemmireddy
Vedoucí práce
Moravec Jiří
Oponent práce
Solnař Stanislav
Studijní obor
Procesní technikaStudijní program
Strojní inženýrstvíInstituce přidělující hodnost
ústav procesní a zpracovatelské technikyPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
This master thesis deals with the literature survey on injection molding machine construction, working and process parameters. And also, optimizing process parameters of the injection molding machine in plastic manufacturing technology to analyze and measure the data experiments and simulations on mold flow in the Injection molding machine. The main aim of this thesis is to perform simulations and compare them with machine settings to understand the principle parameters of the injection molding machine by both theoretically and practically for the study of improving product quality. This involves comparing the Practical results of the parameters of the injection molding machine (flow time, injection pressure, mold temperature, Melting temperature, etc.) by the results of software simulation. Hence we get to know the parameters to be changed to get better quality of the product. This master thesis deals with the literature survey on injection molding machine construction, working and process parameters. And also, optimizing process parameters of the injection molding machine in plastic manufacturing technology to analyze and measure the data experiments and simulations on mold flow in the Injection molding machine. The main aim of this thesis is to perform simulations and compare them with machine settings to understand the principle parameters of the injection molding machine by both theoretically and practically for the study of improving product quality. This involves comparing the Practical results of the parameters of the injection molding machine (flow time, injection pressure, mold temperature, Melting temperature, etc.) by the results of software simulation. Hence we get to know the parameters to be changed to get better quality of the product.
Kolekce
- Diplomové práce - 12118 [150]
Související záznamy
Zobrazují se záznamy příbuzné na základě názvu, autora a předmětu.
-
Výrobní proces vstřikování kompozitního materiálu
Autor: Voldřich Antonín; Vedoucí práce: Skočilas Jan; Oponent práce: Krebs Stefan
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2018-06-22)Tato práce se zabývá procesem vstřikování plastových kompozitů a vlivem nastavení vstřikovacího stroje na mechanické vlastnosti výrobků. Obsahem teoretické části je popis polymerních materiálů, výrobních strojů, vstřikovacího ... -
Parametry procesu vstřikování plastů
Autor: Lukáš Jiří; Vedoucí práce: Skočilas Jan; Oponent práce: Štancl Jaromír
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2017-08-18)Práce se zabývá procesem vstřikování polymerů a jeho následného vlivu na kvalitu a mechanické vlastnosti zkušebních tělísek. Obsahem teoretické části je popis vstřikovacího stroje a samotný proces vstřikování. Důraz je ... -
Učení automatických hráčů online her ve webovém prohlížeči
Autor: Melezínek Jakub; Vedoucí práce: Kuchař Jaroslav; Oponent práce: Klímek Jakub
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2017-02-19)Strojové učení je používáno v mnoha oblastech včetně webu. V této práci je použito při implementaci učenlivých automatických hráčů hrajících webové hry přímo v prohlížeči. Jsou diskutovány rozhodovací systémy pomocí umělých ...