Klimatizace výrobní haly
Air-Conditioning of an Industrial Hall
Typ dokumentu
diplomová prácemaster thesis
Autor
Jakub Doležal
Vedoucí práce
Lain Miloš
Oponent práce
Pokorná Jana
Studijní obor
bez oboruStudijní program
Inteligentní budovyInstituce přidělující hodnost
ústav techniky prostředíPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Tato diplomová práce je zaměřena na klimatizaci výrobní haly nacházející se v Trutnově ve firmě zabývající se výrobou elektrotechnických součástek. V první části je popsána teorie větrání, klimatizace, vzniku škodlivin ve větraném prostoru, fyzikální vlastnosti vlhkého vzduchu a jaké jsou normy a zákony upravující požadavky na vnitřní prostředí. Dále práce obsahuje praktickou část, kde jsou popsány parametry vnitřního a vnějšího prostředí, poté následují samotné výpočty dvou stavů využití výrobní haly. První stav je pro maximální využití prostoru, tj. při maximálních tepelných ziscích a druhý stav při aktuálním využití haly, tedy přibližně polovičním využití. Všechny provozní stavy byly vykresleny v h-x diagramu a navrženy tak, aby bylo dosaženo co nejvíce ekonomického provozu haly. This diploma thesis is focused on air-conditioning of a production hall located in Trutnov in a company dealing with production of electrical components. The first part of the thesis, the theoretical part, describes all the important terms and quantities related with the main topic of the thesis such as ventilation, air conditioning, the generation of pollutants in the ventilated area, the physical properties of humid air and what are the standards and laws governing the indoor requirements. In the second, practical, part are the parameters of internal and external environment described, then follow the calculations of two conditions of utilization of the production hall. The first condition refers to maximum utilization of the space, i.e. at maximum heat gains; and the second condition refers to actual use of the hall, i.e. approximately half utilization. All the operating conditions were plotted in the h-x diagram and designed to achieve the most economical operation of the hall.
Kolekce
- Diplomové práce - 12116 [187]