Design and analysis of energy efficient indoor-climate control methods for historic buildings
Návrh a analýza energeticky šetrných metod řízení vnitřního prostředí historických budov
Typ dokumentu
disertační prácedoctoral thesis
Autor
Magnus Wessberg
Vedoucí práce
Vyhlídal Tomáš
Oponent práce
Vašek Vladimír
Studijní obor
Technická kybernetikaStudijní program
Strojní inženýrstvíInstituce přidělující hodnost
ústav přístrojové a řídící technikyPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Indoor climate in historic buildings pose both practical and scientific challenges. Firstly, establishing a proper indoor climate with respect to both comfort and conservation. Secondly, achieving the desired indoor climate in a non-invasive, sustainable, and energy efficient way. This thesis aims to explore the link between technical equipment and target ranges for indoor climate, i.e. control strategies and algorithms based on the hypothesis that smarter and more effective control of the indoor climate, based on an understanding of the specific characteristics of the building in question can be a cost effective way to achieve a sustainable indoor climate. The first addressed method is intermittent heating of massive historic buildings. To control the change rate of relative humidity at a heat-up event, a simplified model for heat and moisture transfer together with a method to derive the hygrothermal parameters and the time constant of the building from measurements is presented and validated. The study considers a feedforward control algorithm that uses the model to predict and control the change rate of relative humidity during the heat-up event. The method has been validated on measurements and models of three historic churches. Unheated historic buildings often face problem with mould growth. Adaptive ventilation is a candidate for being an energy efficient method to decrease mould growth risk. The research questions are if the measure is sufficient to limit the risk, how it influences the stability in relative humidity, and if it is an energy efficient measure. The present research shows that adaptive ventilation significantly lowers the risk for mould growth on an annual basis, but there is still an increased mould growth risk during short periods when it´s not a sufficient measure. It also was shown that adaptive ventilation increases the risk of mechanical damage on objects due to increased fluctuations of relative humidity. Finally, in a three year study of Skokloster Castle, three climate control measures are compared: dehumidification, conservation heating, and adaptive ventilation. This comparison includes efficiency to prevent risk for mould growth, indoor climate stability, and energy efficiency. The investigation shows that dehumidification had the best result regarding all three criteria. However, the draught proofing of the rooms prior to the study improved the indoor climate significantly. Energeticky efektivní a šetrné řízení vnitřního prostředí v historických budovách je problémem s netriviálním řešením. Je nutné jednak zajistit akceptovatelný komfort pro návštěvníky a zejména pak vhodnost prostředí z pohledu ochrany interiéru budovy a objektů památkové péče. Následným problémem je technická implementace systému úpravy vnitřního prostředí s ohledem na neinvazivnost a energetickou úspornost. Tato práce je zaměřena na analýzu a návrh vybraných metod řízení prostředí v historických budovách z pohledu stanovené metodiky a její technické implementace. První analyzovanou metodou je krátkodobé vytápění historických budov s masivní konstrukcí. Nejprve je navržen aproximativní hygro-termální model dané třídy budov včetně parametrizace modelu na základě neměřených průběhů teploty a relativní vlhkosti. Hlavním výsledkem je návrh algoritmu pro postupné zvyšování tepelného výkonu tak, aby byl eliminován nebezpečně rychlý pokles relativní vlhkosti. Daná metodika je validována na měřených datech a simulačních modelech tří historických kostelů. U nevytápěných historických objektů lze často pozorovat zvýšené hodnoty relativní vlhkosti, které mohou vést k nežádoucímu růstu plísní. Jednou z energeticky šetrných metod, kterou lze dané riziko snížit je adaptivní ventilace. Z analýzy této metody provedené v práci vyplývá její efektivnost ve významném snížení rizika vzniku plísní. Při dlouhodobém provozu je ale možné indikovat časové intervaly, kdy vlivem nevhodných podmínek venkovního prostředí není metoda zcela efektivní. Z analýzy naměřených dat též vyplývá zvýšení rizika poškození objektů hygroskopické povahy následkem zvýšení variability relativní vlhkosti. Následně je v práci provedeno vyhodnocení tříletého experimentu na barokním zámku Skokloster ve Švédsku, s cílem porovnat tři různé metody úpravy vnitřního prostředí: sorpční odvlhčování, vlhkostně řízené vytápění, a adaptivní ventilaci. Z výsledků analýzy vyplývá, že pro daný typ interiérů s absencí vnitřních zdrojů vlhkosti, je nejvhodnější aplikovat odvlhčování pomocí sorpčních odvlhčovačů. Analýza též poukazuje na důležitost zajištění vzduchotěsnosti jako primárního opatření pro zachování bezpečného prostředí dané třídy historických interiérů.
Kolekce
- Disertační práce - 12000 [279]