Měření momentové charakteristiky asynchronního motoru
Measurement of torque characteristics of asynchronous motor
Type of document
diplomová prácemaster thesis
Author
Jan Stejskal
Supervisor
Hlinovský Vít
Opponent
Urban Ivan
Field of study
Elektrické stroje, přístroje a pohonyStudy program
Elektrotechnika, energetika a managementInstitutions assigning rank
katedra elektrických pohonů a trakceRights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item recordAbstract
Tato práce je rozšířením bakalářské práce Jana Stejskala - Automatizace měření malých asynchronních motorů (2017). Cílem diplomové práce je objasnit účel měření momentových charakteristik a provést podrobný rozbor momentové charakteristiky asynchronního motoru. Na základě tohoto rozboru poté uvést způsoby jejího měření a prostředky k tomu potřebné. Problematika je řešena na základě norem ČSN 35 0010 (350010) a ČSN EN 60034-2-1 ed. 2. Poznatky získané z těchto norem jsou následně aplikovány v laboratorním prostředí na asynchronní motory různých výkonů. Na základě takto získaných dat je v závěru práce provedena validace jednotlivých měřicích metod. This diploma thesis is an extension of the bachelor thesis of Jan Stejskal - Automation of Measurement of Small Asynchronous Motors (2017). Its objective is to clarify the purpose of measuring torque characteristics and to perform a detailed analysis of the torque characteristics of the asynchronous motor. Then, based on this analysis, indicate the methods of its measurement and the means needed to do so. The issue is solved on the basis of standards ČSN 35 0010 (350010) and ČSN EN 60034-2-1 ed. 2. The knowledge gained from these standards is then applied in a laboratory environment to asynchronous motors of different powers. At the end of the project, there is a validation of used measuring methods based upon the obtained data.
Collections
- Diplomové práce - 13114 [144]