Návrh skořepinové konstrukce zastřešení plaveckého bazénu
The design of shell roof structure for swimming pool
Typ dokumentu
diplomová prácemaster thesis
Autor
Jordanová Michala
Vedoucí práce
Vráblík Lukáš
Oponent práce
Patrman Martin
Studijní obor
Konstrukce a dopravní stavbyStudijní program
Stavební inženýrstvíInstituce přidělující hodnost
katedra betonových a zděných konstrukcíObhájeno
2019-02-11Práva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Tématem této práce je návrh variant skořepinového zastřešení plaveckého bazénu. Nejdříve je navrhnuto 5 variant skořepinového zastřešení, ze které je vybrána jedna (válcová plocha), které je podrobněji dále řešena. Cílem práce je geometrický návrh zastřešení, tak aby byly dodrženy požadované výšky konstrukce. Návrh byl řešen v program Scia Engineer, kde se řešila analýza postupu výstavby přes nelineární kombinace. Výsledkem je vedení geometrie předpínacích lan a zároveň i geometrie skořepinové střechy a ověření napětí v betonu a ověření únosnosti vybraných prvků. The theme of this thesis is the design of variants of the shell roof structure for the swimming pool. 5 variants of shell roof structure are designed first, from which one is selected (cylindrical surface), which is further elaborated. The aim of the thesis is geometric design of the roofing to maintain the required height of the structure. The design was solved in the Scia Engineer program, which deals with the analysis of the construction phase through a nonlinear combination. The result is the guiding of the geometry of the prestressing strands as well as the geometry of the shell roof structure and verifying concrete stress and verifying the load-bearing capacity of selected elements.
Kolekce
- Diplomové práce - 11133 [460]