Procesní charakteristiky dispergačního zařízení stator - rotor
Process characteristics of stator - rotor dispergation equipment
Typ dokumentu
diplomová prácemaster thesis
Autor
Bauer Jan
Vedoucí práce
Jirout Tomáš
Oponent práce
Fekete Roman
Studijní obor
Procesní technikaStudijní program
Strojní inženýrstvíInstituce přidělující hodnost
ústav procesní a zpracovatelské technikyObhájeno
2019-02-12Práva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Diplomová práce je zaměřena na problematiku procesních charakteristik dispergačních míchadel typu stator - rotor. Cílem práce je získat procesní charakteristiku dvou míchadel firmy IKA. V rešeršní části práce je proveden teoretický rozbor dispergace, klasifikace typů dispergačních míchadel a jejich provozní konfigurace. Dále jsou rozebrány publikované experimentální a numerické metody získávání procesních charakteristik, na které diplomová práce volně navazuje. V další části práce je v softwaru Fluent provedena CFD numerická simulace, která popisuje mechanismus dispergace pomocí vizualizace hydrodynamického proudění. Příkonová charakteristika byla v závěrečné části práce stanovena experimentálně na základě měření příkonu pomocí kalorimetrické metody a z ní byla vyhodnocena příkonová charakteristika ve tvaru Po=f(Re). V poslední fázi jsou porovnány a diskutovány výsledky numerické simulace a experimentu. This diploma thesis is focused on the fundamentals of the rotor-stator dispersion mixer's process characteristics. The aim of this work is to obtain the process characteristics of two different mixers made by the IKA company. In the research chapter of the thesis, there is a theoretical analysis of dispersion, dispersion mixer type classification and their operating configurations. Then there is an analysis of published experimental and numerical methods of obtaining the process characteristics. This diploma thesis then independently builds on the published methods. In the next part, there is a CFD numerical simulation describing the mechanism of dispersion by hydrodynamic flow visualisation, using the Fluent software. In the final part, the power draw was determined experimentally by wattage measurement, specifically the calorimetric method, resulting in the equation Po=f(Re). The results of the numerical simulation and the experiment are discussed and compared in the last part of the diploma thesis.
Kolekce
- Diplomové práce - 12118 [155]