Cylinder Head Gasket for an Experimental Single Cylinder
Cylinder Head Gasket for an Experimental Single Cylinder
Typ dokumentu
diplomová prácemaster thesis
Autor
Kubový Lukáš
Vedoucí práce
Hořenín Jindřich
Oponent práce
Sýkora Jan
Studijní obor
Advanced PowertrainsStudijní program
Master of Automotive EngineeringInstituce přidělující hodnost
ústav automobilů, spalovacích motorů a kolejových vozidelObhájeno
2017-09-15Práva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Cílem této práce je průzkum současných možností utěsnění hlavy válce experimentálního jednoválcového motoru a navrhnout vhodné řešení těsnění hlavy válce. Navrhované řešení obsahuje požadované předpětí hlavových šroubů, analýzu napětí horního uložení válce s navrženým těsněním, teplotní pole vložky válce, bloku motoru a navrženého těsnění. Výrobní dokumentace vložky válce a bloku motoru je vytvořena s ohledem na zvolené těsnění. The aim of this work is to investigate the current possibilities of head gaskets of the experimental single-cylinder engine and propose an appropriate solution. The proposed solution contains the required preload of the cylinder head screws, stress analysis of the upper mounting of the cylinder with the proposed gasket, the temperature field of the cylinder liner and the cylinder block with the given cylinder head gasket. The manufacturing documentation of the engine block and cylinder liner is made with regard to the chosen gasket design.
Kolekce
- Diplomové práce - 12120 [451]
Související záznamy
Zobrazují se záznamy příbuzné na základě názvu, autora a předmětu.
-
Blok válce experimentálního jednoválcového motoru
Autor: Kacovský Ondřej; Vedoucí práce: Vávra Jiří; Oponent práce: Emrich Miloslav
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2016-08-18)Práce se zabývá návrhem bloku pro experimentální jednoválcový motor Škoda. V první části je vlastní návrh bloku pro jednoválcovou i víceválcovou hlavu. Následuje technologie výroby jednotlivých dílů bloku včetně navrhovaných ... -
Excitation of Conducting Cylinder Using Slots
Autor: Pascawati Anita; Vedoucí práce: Hazdra Pavel; Oponent práce: Závodný Vadim
(České vysoké učení technické v Praze. Vypočetní a informační centrum.Czech Technical University in Prague. Computing and Information Centre., 2017-06-07)This master thesis deals with the investigation to excite the conducting cylinder of rocket chassis using slots. The theory of characteristic mode (TCM) is used to find the resonance modes of the cylinder. The model of ... -
Design Proposal for 4-Cylinder Compression-Ignition Engine
Autor: Stastny Daniel; Vedoucí práce: Mikulec Antonín; Oponent práce: Brankov Ivaylo
Nowadays, most of the vehicles runs on Diesel engines. We do not use coal-powered steam engines any more. Rudolf Diesel played a vital role in the modern era of transportation by inventing Diesel engines. The need for even ...