• A MATHEMATICAL MODEL OF GALVANIC CORROSION UNDER THE CONDITIONS OF A THIN ELECTROLYTE FILM 

      Autor: Jeníček , Vít; Diblíková , Linda
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      A mathematical model of galvanic corrosion under the conditions of a thin electrolyte film was used to evaluate atmospheric corrosion. Experimentally determined weight loss values were used to validate the modelled results. ...
    • A METHOD FOR MEASURING THE SENSITIVITY OF BUILDING STRUCTURAL MEMBERS TO FIRE DECAY PHASES 

      Autor: Gernay , Thomas
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Firefighters face a major threat when intervening in a building during a fire: the possibility of structural collapse during the cooling phase of the fire, or soon thereafter. At present, this threat is amplified by the ...
    • A QUANTITATIVE EVALUATION OF THE WATER DISTRIBUTION IN A SOIL SAMPLE USING NEUTRON IMAGING 

      Autor: Šácha , Jan; Sněhota , Michal; Hovind , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      This paper presents an empirical method by Kang et al. recently proposed for correcting two-dimensional neutron radiography for water quantification in soil. The method was tested on data from neutron imaging of the water ...
    • A SUPERINTEGRABLE MODEL WITH REFLECTIONS ON S^3 AND THE RANK TWO BANNAI-ITO ALGEBRA 

      Autor: De Bie , Hendrik; Genest Xavier, Vincent; Lemay , Jean-Michel; Vinet , Luc
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      A quantum superintegrable model with reflections on the three-sphere is presented. Its symmetry algebra is identified with the rank-two Bannai-Ito algebra. It is shown that the Hamiltonian of the system can be constructed ...
    • AD HOC TEAMWORK BEHAVIORS FOR INFLUENCING A FLOCK 

      Autor: Genter , Katie; Stone , Peter
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Ad hoc teamwork refers to the challenge of designing agents that can influence the behavior of a team, without prior coordination with its teammates. This paper considers influencing a flock of simple robotic agents to ...
    • ADAPTIVE DISTRIBUTION OF A SWARM OF HETEROGENEOUS ROBOTS 

      Autor: Prorok , Amanda; Ani Hsieh , M.; Kumar , Vijay
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      We present a method that distributes a swarm of heterogeneous robots among a set of tasks that require specialized capabilities in order to be completed. We model the system of heterogeneous robots as a community of species, ...
    • AN EXPERIMENTAL ASSESSMENT OF THE PLATE HEAT EXCHANGER CHARACTERISTICS BY WILSON PLOT METHOD 

      Autor: Opatřil , Jan; Havlík , Jan; Bartoš , Ondřej; Dlouhý , Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      An aim of this paper is suggestion of the evaluation method based on the experimental data and the Wilson plot method for the Plate Heat Exchangers (PHE). For the purpose of the project the new experimental loop was built ...
    • ANALYSIS AND IMPLEMENTATION OF APPLICATION SCHEMAS FOR THE INSPIRE BUILDINGS THEME 

      Autor: Med, Michal; Souček, Petr
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Implementing the INSPIRE directive involves transforming various data themes into the structure and content given by Data Specifications published by the Joint Research Center of the European Commission. The data is to be ...
    • ANALYSIS OF INTENSIVELY BLASTED ELECTRIC ARC BURNING IN THE ARC HEATER'S ANODE CHANNEL 

      Autor: Senk , Josef; Jakubova , Ivana; Laznickova , Ilona
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      The paper deals with the description of the intensively blasted electric arc burning in Ar in the anode channel of the arc heater operated under various conditions. Directly measured experimental data (current, voltage, ...
    • ANALYSIS OF WELD JOINT DEFORMATIONS BY OPTICAL 3D SCANNING 

      Autor: Urminsky , Jan; Marônek , Milan; Jáňa , Miroslav; Morovič , Ladislav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      This paper presents an analysis of weld joint deformation using optical 3D scanning. The weld joints of bimetals were made by explosion welding (EXW). GOM ATOS II TripleScan SO MV320 equipment with measuring volume 320 × ...
    • APPLICATION OF DIMENSIONAL ANALYSIS IN HEAT LOSS DETERMINING IN DISTRICT HEATING SYSTEMS 

      Autor: Čarnogurská , Mária; Dobáková , Romana; Příhoda , Miroslav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Existing procedures for determining the heat loss in heat distribution use balance relations, or rather they are based on the theory of heat and mass transfer. Dimensional analysis enables a new point of view that demonstrated ...
    • ASTRONOMICAL GLASS PLATE NEGATIVES: MONITORING OF EMULSION LAYER DETERIORATION 

      Autor: Miskova , L.; Novák , P.; Hudec , R.; Novotná , M.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      One of the techniques for making photographic negatives most used in the history of photography were gelatin glass plates. This technique was used not only in the artistic field but also and mainly in the scientific field. ...
    • BACK TO BASICS: TOWARDS NOVEL COMPUTATION AND ARRANGEMENT OF SPATIAL SENSORY IN IMAGES 

      Autor: Wen , Wei; Khatibi , Siamak
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      The current camera has made a huge progress in the sensor resolution and the lowluminance performance. However, we are still far from having an optimal camera as powerful as our eye is. The study of the evolution process ...
    • COMPARISON OF AXIAL FAN ROTOR EXPERIMENTAL DATA WITH CFD SIMULATION 

      Autor: Prachař , Aleš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Data obtained from an experimental simulation on a new test rig for axial fans are compared to a CFD simulation. The Edge solver is used and the development needed for the simulation (boundary conditions, free stream ...
    • CONSTITUTIVE MODEL OF STEEL FIBRE REINFORCED CONCRETE SUBJECTED TO HIGH TEMPERATURES 

      Autor: Blesak , Lukas; Goremikins , Vadims; Wald , Frantisek; Sajdlova , Tereza
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Research on structural load-bearing systems exposed to elevated temperatures is an active topic in civil engineering. Carrying out a full-size experiment of a specimen exposed to fire is a challenging task considering not ...
    • COVARIANT INTEGRAL QUANTIZATIONS AND THEIR APPLICATIONS TO QUANTUM COSMOLOGY 

      Autor: Gazeau , Jean-Pierre
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      We present a general formalism for giving a measure space paired with a separable Hilbert space a quantum version based on a normalized positive operator-valued measure. The latter are built from families of density operators ...
    • CRYSTALLINE ADMIXTURES AND THEIR EFFECT ON SELECTED PROPERTIES OF CONCRETE 

      Autor: Pazderka, Jiří; Hájková, Eva
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      There have been many experimental measurements of the waterproofing ability and durability of concrete with a crystalline admixture, but some other important properties have not been reliably tested yet. The results of the ...
    • CYCLIC STRESS ANALYSIS OF POLYESTER, ARAMID, POLYETHYLENE AND LIQUID CRYSTAL POLYMER YARNS 

      Autor: Vannucchi de Camargo , Felipe; Marcos Guilherme Eduardo, Carlos; Fragassa , Cristiano; Pavlovic , Ana
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      Mooring ropes used in offshore oil platforms are exposed to a set of extreme environmental conditions that can be crucial to their behaviour in service. Considering the elevated mechanical demands on these ropes imposed ...
    • DETERMINING THE ROLE OF INDIVIDUAL FLY ASH PARTICLES IN INFLUENCING THE VARIATION IN THE OVERALL PHYSICAL, MORPHOLOGICAL, AND CHEMICAL PROPERTIES OF FLY ASH 

      Autor: Haider, Usman; Bittnar, Zdenek; Kopecky, Lubomír; Šmilauer, Vít; Pokorny, Jaroslav; Zaleska, Martina; Prošek, Zdenek; Hrbek, Vladimír
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      The properties of fly ashes vary because of the differences in the properties of their individual particles, and the determination of variation in these properties is of interest to the industries which use pulverized raw ...
    • EFFECT OF FIBRE ASPECT RATIO AND FIBRE VOLUME FRACTION ON THE EFFECTIVE FRACTURE ENERGY OF ULTRA-HIGH-PERFORMANCE FIBRE-REINFORCED CONCRETE 

      Autor: Sovják, Radoslav; Máca, Petr; Imlauf, Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2016)
      This paper investigates the effective fracture energy of UHPFRC with various fibre volume fractions and various fibre aspect ratios. We have concluded that the effective fracture energy is dependent on both the fibre volume ...