Vady a rizika při výstavbě montovaných dřevostaveb
Construction defects and risks of prefabricated wooden structures
Type of document
bakalářská prácebachelor thesis
Author
Tesařík Michal
Supervisor
Pospíchal Václav
Opponent
Balún Martin
Field of study
Příprava, realizace a provoz stavebStudy program
Stavební inženýrstvíInstitutions assigning rank
katedra technologie stavebDefended
2016-06-29Rights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://www.cvut.cz/sites/default/files/content/d1dc93cd-5894-4521-b799-c7e715d3c59e/cs/20160901-metodicky-pokyn-c-12009-o-dodrzovani-etickych-principu-pri-priprave-vysokoskolskych.pdfVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://www.cvut.cz/sites/default/files/content/d1dc93cd-5894-4521-b799-c7e715d3c59e/cs/20160901-metodicky-pokyn-c-12009-o-dodrzovani-etickych-principu-pri-priprave-vysokoskolskych.pdf
Metadata
Show full item recordAbstract
V této bakalářské práci se autor zabývá vadami a riziky vznikajícími při výstavbě montovaných dřevostaveb metodou Two by Four. Autor analyzuje všechny technologické etapy výstavby, které jsou klíčové pro realizaci a během kterých může ze strany stavebníka docházet k chybám a ukazuje tyto chyby a vhodná řešení na konkrétním objektu. Tato práce rovněž obsahuje návrh technologického řešení stavebně fyzikální problematiky zateplení konkrétního objektu. Tyto návrhy jsou následně posouzeny z hlediska technického a finančního. Předmětem této práce je také řešení problematiky výběru vhodného stavebního materiálu a jeho ochrany a následného vyhodnocení ztrátovosti řeziva vlivem realizace. In this bachelor thesis, the author deals with defects and risks arising during construction of prefabricated wooden structures by the Two by Four method. The author analyzes all technological phases of constructing, which are key for the realization, and during which mistakes caused by contractor can be made, and shows these mistakes and appropriate solutions on particular building. This thesis also contains technological solution design of the building physics issues of ETICS on specific building. These designs are then assessed from technical and financial point of view. This thesis is also dealing with the selection issues of the suitable building material and its protection against external influences and following evaluation of the loss rate of timber caused by realization.
Collections
- Bakalářské práce - 11122 [649]