Stanovení materiálových charakteristik metodou instrumentované indentace.
Determination of material properties by instrumented indentation
Type of document
diplomová prácemaster thesis
Author
Teplý Stanislav
Supervisor
Cejp Jiří
Opponent
Pešlová Františka
Field of study
Výrobní a materiálové inženýrstvíStudy program
Strojní inženýrstvíInstitutions assigning rank
ústav materiálového inženýrstvíDefended
2016-09-12Rights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://www.cvut.cz/sites/default/files/content/d1dc93cd-5894-4521-b799-c7e715d3c59e/cs/20160901-metodicky-pokyn-c-12009-o-dodrzovani-etickych-principu-pri-priprave-vysokoskolskych.pdfVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://www.cvut.cz/sites/default/files/content/d1dc93cd-5894-4521-b799-c7e715d3c59e/cs/20160901-metodicky-pokyn-c-12009-o-dodrzovani-etickych-principu-pri-priprave-vysokoskolskych.pdf
Metadata
Show full item recordAbstract
Tato diplomová práce v teoretické části popisuje historii, různé přístupy a problematiku analýzy naměřené indentační křivky instrumentovanou indentační zkouškou. V praktické části jsou prověřeny některé postupy zjišťování vlastností z naměřených dat instrumentovanou indentační zkouškou sférickým indentorem v měřítku makro. Ty jsou následně porovnány s výsledky ze zkoušky tahem a výsledky indentační zkoušky v měřítku mikro s indentorem typu Berkovich. Z porovnání vyplynulo, že lze z indentační křivky spolehlivě zjistit modul pružnosti, vtiskovou tvrdost, tvrdost podle Brinella, pružnou a plastickou práci vnikacího procesu, závislost napětí na deformaci odpovídající té ze zkoušky tahem a následně i koeficient a exponent deformačního zpevnění a mez kluzu. This diploma thesis describes history, basic approaches and the difficulties of analysis of indentation curve. In experimental section are approaches, listed in theoretical part, applied to measured indentation curve obtained by instrumented indentation using spherical indenter in macro scale. The results of material properties are then compared with the results obtained by tensile test and instrumented indentation using Berkovich indenter in micro scale. From the comparison it is obvious that it is possible to determine following properties from indentation curve: modulus of elasticity, indentation hardness, Brinell hardness, elastic and plastic work of indentation process, stress - strain curve corresponding to that obtained by tensile test, and from this curve the coefficient and strain hardening exponent and yield stress.
View/ Open
Collections
- Diplomové práce - 12132 [103]