Světlovody pro osvětlování vnitřních prostor
Light Pipes for Illumination of Interiors
Type of document
diplomová prácemaster thesis
Author
Novotný Martin
Supervisor
Prajzler Václav
Opponent
Veselý Tomáš
Study program
Inteligentní budovyInstitutions assigning rank
katedra měřeníDefended
2016-06-16Rights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://www.cvut.cz/sites/default/files/content/d1dc93cd-5894-4521-b799-c7e715d3c59e/cs/20160901-metodicky-pokyn-c-12009-o-dodrzovani-etickych-principu-pri-priprave-vysokoskolskych.pdfVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://www.cvut.cz/sites/default/files/content/d1dc93cd-5894-4521-b799-c7e715d3c59e/cs/20160901-metodicky-pokyn-c-12009-o-dodrzovani-etickych-principu-pri-priprave-vysokoskolskych.pdf
Metadata
Show full item recordAbstract
Diplomová práce se zabývá návrhem, realizací a ověřením vlastností systému pro osvětlení vnitřních prostor pomocí slunečního světla zavedeného pomocí optických vláken. V úvodu práce je uvedeno seznámení s problematikou a popsání základního rozdělení systému světlovodných vedení. Jsou zde uvedeny již existující projekty pro osvětlení denním světlem. Hlavní část práce je zaměřena na návrh vlastního systému osvětlení, jeho analýza v programu OptiCAD pomocí paprskové metody. Výpočet účinnosti systému a následně výroba navrženého systému skládající se z více kroků. Vstupní část systému byla realizována z Fresnelových čoček o průměru 50 mm a 80 mm sloužící ke koncentraci optického záření. Pro přenos světla byly použity dva druhy optických vlnovodů v podobě plastových optických vláken (POF) o průměru jádra vlákna 980 um a 3 mm. Pro rozptyl světla do objektu byly použité dva druhy difuzoru (prizmatický z akrylového skla a mikroprizmatický z PMMA). A v závěru jsou uvedené měřící metody použité pro analýzu vyrobeného systému denního osvětlení a na závěr jsou shrnuty dosažené výsledky. The thesis deals with the design, implementation and verification of system properties for lightening of the interior space, using the sun light implemented by the optic fibers. The introduction deals with the explanation of the problem and with the description of the basic division of the light-pipe lines. The already existing projects for the lightening with the daylight are also introduced. The main part of the thesis is focused on the design of own lightening system, its´ analyzes in the OptiCAD program, using the Ray tracing. The calculation of the efficacy of the system and subsequently the production of the designed system is consisting out of more steps. The entrance step of the system was implemented out of the Fresnel lens with the diameter of 50 and 80 mm, working for the concentration of the optical lightening. For the light transfer the two types of the optical waveguide in the form of plastic optical fibers (POF) with the core diameter of 980 um and 3 mm. Two diffusers have been used for the dispersion of the light into the building (the prismatic one out of the acryl glass and microprismic out of PMMA). The measuring methods used for the analyzes of the produced system and the results are introduced in the end of my thesis.
Collections
- Diplomové práce - 13138 [374]