Analýza světelně technických vlastností materiálů pro difuzory svítidel
Photometric analysis of optical materials for luminaire diffusers
Type of document
bakalářská prácebachelor thesis
Author
Holubec Lukáš
Supervisor
Bálský Marek
Opponent
Bayer Rudolf
Field of study
Aplikovaná elektrotechnikaStudy program
Elektrotechnika, energetika a managementInstitutions assigning rank
katedra elektroenergetikyRights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://www.cvut.cz/sites/default/files/content/d1dc93cd-5894-4521-b799-c7e715d3c59e/cs/20160901-metodicky-pokyn-c-12009-o-dodrzovani-etickych-principu-pri-priprave-vysokoskolskych.pdfVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://www.cvut.cz/sites/default/files/content/d1dc93cd-5894-4521-b799-c7e715d3c59e/cs/20160901-metodicky-pokyn-c-12009-o-dodrzovani-etickych-principu-pri-priprave-vysokoskolskych.pdf
Metadata
Show full item recordAbstract
Cílem této práce je změřit fotometrické vlastnosti vybraných vzorků rozptylových termoplastů, jako je např. světelný tok, činitel prostupu a úhel poloviční svítivosti. Bylo třeba navrhnout a zrealizovat měřící přípravek pro měřené vzorky. Veškeré měření bylo provedeno na goniofotometru v laboratoři světelné techniky Elektrotechnické fakulty ČVUT v Praze, katedry elektroenergetiky. Z naměřených dat byly vypočteny dané fotometrické veličiny a sestrojeny grafy čar svítivosti, které poslouží firmě TREVOS a.s. k výběru vhodného materiálu pro výrobu difuzorů LED svítidel. The objective of this bachelor's project is to measure the photometric properties of selected samples of thermoplastics (e.g. luminous flux, transmittance and half-peak divergence). It was necessary to design and realize measuring device for the measured samples. All the measuring has been done on the goniophotometer in laboratory of photometry at the Department of Electrical Power Engineering of the Faculty of Electrical Engineering of the CTU in Prague. Photometric properties of thermoplastics were calculated from the measured data and then the luminous intensity distribution diagram were designed. These results will be then used by the TREVOS company to select a suitable material for the manufacture of diffusers LED lights.
Collections
- Bakalářské práce - 13115 [273]