Návrh důlního transformátoru 1400 kVA v nevýbušném závěru
Design of the Mine Transformer 1400 kVA
Type of document
diplomová prácemaster thesis
Author
Škandera Zbyněk
Supervisor
Buhr Karel
Opponent
Hruška Karel
Field of study
ElektroenergetikaStudy program
Elektrotechnika, energetika a managementInstitutions assigning rank
katedra elektroenergetikyRights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://www.cvut.cz/sites/default/files/content/d1dc93cd-5894-4521-b799-c7e715d3c59e/cs/20160901-metodicky-pokyn-c-12009-o-dodrzovani-etickych-principu-pri-priprave-vysokoskolskych.pdfVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://www.cvut.cz/sites/default/files/content/d1dc93cd-5894-4521-b799-c7e715d3c59e/cs/20160901-metodicky-pokyn-c-12009-o-dodrzovani-etickych-principu-pri-priprave-vysokoskolskych.pdf
Metadata
Show full item recordAbstract
V práci studuji problematiku návrhu a modelování důlního transformátoru s chlazením AN/AN. Důraz je zde kladen zejména na požadavky nízkých ztrát, nároky na možnost působení v prostředí s nebezpečím výbuchu a s tím souvisejícím oteplením transformátoru. K simulacím je použito prostředí ANSYS Maxwell, k tvorbě geometrie modelu software Autodesk Inventor. Teoretický návrh je nejprve realizován geometricky do 3D sestavy, která je pak použita pro modelování ztrát v železe transformátoru a zobrazení příslušných souvisejících průběhů. Následně je diskutováno oteplení transformátoru s ohledem na konstrukci nádoby - nevýbušného závěru, v němž je transformátor umístěn. The thesis is studying problems of design and modeling of mining transformer with AN/AN cooling. The emphasis is placed on the requirements of low loss, claims the pos- sibility of working in the hazardous areas as a electrical equipment for explosive atmospheres. For the simulations ANSYS Maxwell environment is used and for creating the geometry model Autodesk Inventor. At first, the theoretical design is realized geometrically in 3D assembly which is then used for modeling of transformer core losses and related diagrams. Subsequently, heat transfer of the transformer is discussed, focused on the design of the explosion protective hermetically sealed tank, in which the transformer is located.
Collections
- Diplomové práce - 13115 [382]