Model aplikátoru pro regionální hypertermii na bázi osmi antén typu “Bow-tie“
Model of Applicator for Regional Hyperthermia Based on Eight "Bow-tie" Antennas
Typ dokumentu
diplomová prácemaster thesis
Autor
Filip Zajan
Vedoucí práce
Vrba Jan
Oponent práce
Fišer Ondřej
Studijní obor
Lékařská technikaStudijní program
Lékařská elektronika a bioinformatikaInstituce přidělující hodnost
katedra teorie obvodůPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Tato diplomová práce se zabývá návrhem a realizací aplikátoru pro regionální hypertermii na bázi matice osmi antén typu Bow-tie. V úvodu je rozebírána problematika interakce elektromagnetického pole s biologickou tkání, poté princip mikrovlnné hypertermie a následně technické prostředky k návrhu regionálního aplikátoru. Metodou kvalitativního výzkumu byl v domácích podmínkách vyroben aplikátor a fantom lidské tkáně podle navržených modelů. Na aplikátoru byl změřen koeficient odrazu jednotlivých antén a následně připojen na generátor mikrovlnného záření. Pomocí IR kamery byla v řezu fantomu zaznamenána teplota a data vyhodnocena. This master’s thesis deals with the design and realization of the applicator for regional hyperthermia based on a matrix of eight Bow-tie antennas. The introduction analyses the problematics of an interaction of the electromagnetic fields with a biological tissue and the principle of microwave hyperthermia. Subsequently, it discusses the technical equipment for the design of the regional applicator. By a method of qualitative research, the applicator and a phantom of a human tissue were produced at home according to the designed models. The reflection coefficient of each antenna was measured individually and then connected to the microwave radiation generator. In the slice of the phantom the temperature was recorded by IR camera and the data were then processed.
Kolekce
- Diplomové práce - 13131 [192]