An experimental study of reinforced concrete beamcolumn joint with partially high strengthened longitudinal bar

Abstract

It is necessary to generate the yield position away from the column face to minimize damage to the beam-column joint during a large earthquake in a reinforced concrete building. The same efficacy can be realized using partially high strengthened rebar. The number of longitudinal bars can be calculated for a bending moment smaller than the column face, reducing their number compared to the conventional bar-arrangement method. This paper describes reinforced concrete an interior beam-column subassemblage tests using this rebar as the longitudinal bars of beams and a column. The beam yield hinge was formed at a position apart from the column face, and the damage to the beam-column joint was less than the conventional bar-arrangement method. Additionally, the good performance was obtained if the bending strength of the column was large, even if the shear capacity margin of the beam-column joint was small. The column-beam flexural strength ratio and shear capacity margin at the beam-column joint need to be set with consideration of their relationship.