FEASIBILITY STUDY OF MICRO-LATTICE STRUCTURES BY MULTIPHOTON LITHOGRAPHY
Typ dokumentu
articlePeer-reviewed
publishedVersion
Autor
Wimmer, Markus
Major, Zoltan
Práva
Creative Commons Attribution 4.0 International Licensehttp://creativecommons.org/licenses/by/4.0/
openAccess
Metadata
Zobrazit celý záznamAbstrakt
The paper describes the possibilities of additive manufacturing with multiphoton lithography. The basis of this technology is that a laser beam (with a certain wavelength) is fired into the mixture of a monomer and a photo-initiator. When the energy of the laser is high enough, the latter acts as a catalyser for the polymerization of the monomer compound. This study focuses on the influences of certain parameters of the multiphoton lithography process. One of the important aspects is the choice of the solvent for the post processing. In sequence to the solvent problem, the influence of the layer height is examined. Furthermore the limits and possibilities of the setup in use are investigated. As an example the differences in fabrication with the laser firing with "constant frequency" and "constant density" were subject of this investigation. The second goal of the study was to compare three different structures consisting of periodically repeating elements, scaled in size and number of elements per side.
Kolekce
K tomuto záznamu jsou přiřazeny následující licenční soubory:
Kromě případů, kde je uvedeno jinak, licence tohoto záznamu je Creative Commons Attribution 4.0 International License