Now showing items 1-20 of 24

    • ON COMPARISON OF 3D ISOGEOMETRIC TIMOSHENKO AND BERNOULLI BEAM FORMULATIONS 

      Author: Dvořáková, Edita; Patzák, Bořek
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      Application of isogeometric analysis (IGA) for curved beams is very convenient for its ability of exact representation of curved geometries. Several beam formulation has been presented since the introduction of IGA. In ...
    • APPLICATION OF THE MORI-TANAKA METHOD TO DESCRIBE THE RATE-DEPENDENT BEHAVIOR OF UNIDIRECTIONAL FIBROUS COMPOSITES 

      Author: Valentová, Soňa; Šejnoha, Michal; Vorel, Jan; Sedláček, Radek; Padevět, Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This paper examines the possibility of using the Mori-Tanaka micromechanical model describe the rate dependent behavior of the polymer matrix based fibrous composites. The generalized Leonov model is adopted to capture the ...
    • BEAM ELEMENT UNDER FINITE ROTATIONS 

      Author: La Malfa Ribolla, Emma; Jirásek, Milan; Horák, Martin
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The present work focuses on the 2-D formulation of a nonlinear beam model for slender structures that can exhibit large rotations of the cross sections while remaining in the small-strain regime. Bernoulli-Euler hypothesis ...
    • LOCALIZATION ANALYSIS OF DAMAGE FOR ONE-DIMENSIONAL PERIDYNAMIC MODEL 

      Author: Mikeš, Karel; Jirásek, Milan; Zeman, Jan; Rokoš, Ondřej; Peerlings, Ron H. J.
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      Peridynamics is a recently developed extension of continuum mechanics, which replaces the traditional concept of stress by force interactions between material points at a finite distance. The peridynamic continuum is thus ...
    • MECHANICAL AND CHEMICAL ACTIVATION OF BLAST FURNACE SLAG AND ITS INFLUENCE ON THE MECHANICAL PROPERTIES OF THE RESULTING CEMENT PASTE 

      Author: Horych, Jan; Tesárek, Pavel; Prošek, Zdeněk
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The usage of waste materials is a very important global topic. The large amount of waste everywhere in the world needs to be processed or disposed. Landfilling is not an option anymore, because of European legislation and ...
    • EVALUATION OF IMPACT OF ELEVATED TEMPERATURES ON YOUNG’S MODULUS OF GLT BEAMS 

      Author: Kucíková, Lucie; Šejnoha, Michal; Janda, Tomáš; Padevět, Pavel; Marseglia, Guido
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The influence of elevated temperatures on mechanical behavior of glued laminated timber beams is examined on the basis of tensile tests. Dog bone samples prepared from beams exposed to fire of variable duration were ...
    • MODELING TIME-DEPENDENT DEFORMATIONS OF CONCRETE MEMBERS SUBJECTED TO SYMMETRIC AND ASYMMETRIC DRYING 

      Author: Horák, Pavel; Havlásek, Petr
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The time-dependent behavior of concrete members with uniform cross-section subjected to symmetric drying can be predicted with one of many models anchored in the design codes. Since these models use the cross-sectional ...
    • COMPARING THE HOEK-BROWN AND MOHR-COULOMB FAILURE CRITERIA IN FEM ANALYSIS 

      Author: Poklopová, Tereza; Pavelcová, Veronika; Šejnoha, Michal
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This paper revisits the issue of a potential substitutions of the Hoek-Brown failure model by the standard Mohr-Coulomb model in the stability analysis of rock masses. The derivation of equivalent shear strength parameters ...
    • SIMULATION OF T-JOINTS BETWEEN RHS STEEL MEMBERS WITH OFFSET IN ABAQUS CAE 

      Author: Kalmykova, Svitlana
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The current paper focuses on numerical simulation peculiarities of offset welded rectangular hollow section joints. Understanding the modelling techniques can result in easier and faster and above all correct outcomes from ...
    • FRACTURE ENERGY OF ILLITIC RAMMED EARTH WITH HIGH WATER-CLAY RATIO 

      Author: Mužíková, Barbora; Plaček Otcovská, Tereza; Padevět, Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The article is focused on design of mixture of rammed earth, producing, testing and determination of fracture energy of unfired rammed earth and its stress-strain curve in tensile bending test. Three different mixtures of ...
    • INFLUENCE OF EARTH COMPOSITION ON ADSORPTION CAPACITY OF METHYLENE BLUE DYE 

      Author: Plaček Otcovská, Tereza; Mužíková, Barbora; Padevět, Pavel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      Final properties of unfired earth are influenced by composition of earth mixtures. Methylene blue test could be useful method for analysis of earth composition. This would facilitate of designing unfired earth building ...
    • NUMERICAL SIMULATION OF SLUMP FLOW TEST OF CEMENT PASTE COMPOSITES 

      Author: Němeček, Jiří; Němeček, Jiří
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This study presents a numerical simulation of the mini-slump flow test performed on the Haegerman table, according to EN 1015-3. The two-dimensional axisymmetrical Volume of fluid (VOF) model is used for the calculation. ...
    • AUTOMATED BIM ENTITY RECONSTRUCTION FROM UNSTRUCTURED 3D POINTCLOUDS 

      Author: Voříšek, Jan; Patzák, Bořek; Dvořáková, Edita; Rypl, Daniel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      Laser scanning is used widely in architecture and construction to document existing buildings by providing accurate data for creating a 3D model. The output is a set of data points in space, so-called point cloud. While ...
    • NUMERICAL COMPARISON OF TRANSGINGIVAL AND SUBGINGIVAL DENTAL IMPLANTS IN REGARD TO THEIR STRESS DISTRIBUTIONS 

      Author: Řehounek, Luboš; Jíra, Aleš; Javorská, Gabriela; Bodlák, Daniel
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      Most modern dental implants differentiate in regard to the fixation of the abutment into two main categories - the external or internal hexagon or octagon. We performed mechanical tests according to the ČSN EN ISO 14801 ...
    • MICRONIZED CONCRETE POWDER AS MIRCOFILLER IN CEMENT PASTE: INFLUENCE ON HYDRATION AND STRUCTURE 

      Author: Topič, Jaroslav; Prošek, Zdeněk
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The reuse of old concrete as a coarse and fine recycled aggregate in cement composites is relatively well researched, and therefore a very fine fraction of recycled concrete was used in this paper. When using a very fine ...
    • FIRE PROTECTION OF STEEL ELEMENTS USING LIGHTWEIGHT HYBRID CEMENT MORTAR 

      Author: Šulc, Stanislav; Šmilauer, Vít; Šejna, Jakub; Wald, František
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      Material properties of steel structures are significantly reduced at high temperatures, so a fire protection has strong positive impact on the fire resistance of the structure. Fire resistance of steel elements can be ...
    • THERMO-MECHANICAL MODEL FOR CONCRETE PAVEMENT 

      Author: Veselý, Jakub; Šmilauer, Vít
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This paper describes a numerical thermo-mechanical model for concrete pavement, implemented in OOFEM software. The thermal part is a heat transfer problem with appropriate initial and boundary conditions (sun irradiation, ...
    • OPTIMIZATION OF TUNED MASS DAMPERS ATTACHED TO DAMPED STRUCTURES - MINIMIZATION OF MAXIMUM DISPLACEMENT AND ACCELERATION 

      Author: Štěpánek, Jan; Máca, Jiří
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      A tuned mass damper is a device, which can be highly helpful while dealing with dynamic behaviour of structures. Its proper design is conditioned by knowledge of both loading and the structure properties. In many cases, ...
    • INCREASING THE BIOLOGICAL RESISTANCE OF GYPSUM BY MEANS OF SILVER, CALCIUM AND COPPER IONS 

      Author: Prošek, Zdeněk; Sekavová, Hana; Ryparová, Pavla
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      The article focuses on the effects of additives increasing biological resistance of gypsum against degradation of the material. In this study we use silver nitrate, calcium oxide and copper sulphate as an additive that ...
    • DETECTION OF THE PRESENCE OF MICROORGANISMS DURING PRODUCTION OF PLASTERBOARD 

      Author: Sekavová, Hana; Prošek, Zdeněk; Ryparová, Pavla
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2021)
      This article is focused on detection microorganisms appearing during production of gypsum plasterboards. The research is carried out within the project TAČR ZÉTA TJ02000235 Sádrokarton se zvýšenou odolností proti bilogické ...