Studie koncepčního řešení vysokorychlostní jednotky pro VRT v ČR
Study of the conceptual solution of a high-speed unit for VRT in the Czech Republic
Type of document
diplomová prácemaster thesis
Author
Jiří Zubr
Supervisor
Kolář Josef
Opponent
Pracht Ladislav
Field of study
Kolejová vozidlaStudy program
Dopravní a transportní technikaInstitutions assigning rank
ústav automobilů, spalovacích motorů a kolejových vozidelRights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item recordAbstract
Tématem této diplomové práce je studie konceptu vysokorychlostní jednotky použitelné pro provoz na VRT v ČR. V teoretické části je provedena rešerše současných vysokorychlostních jednotek provozovaných v Evropě a v Asii. Následuje zhodnocení a výběr vhodných parametrů jednotky. V praktické části je v typovém výkrese proveden návrh interiéru sedmivozové jednotky a kontrola kinematického obrysu dle UIC 505. Práce pokračuje výpočtem parametrů vypružení včetně výpočtu vlastních frekvencí. Dále zahrnuje koncepční návrh pohonu, sestavný výkres trakčního podvozku a trakční charakteristiky vysokorychlostní jednotky. Vedlejším cílem studie bylo nalezení a poukázání na základní možné problémy při použití podvozků s vnitřním rámem. The topic of this thesis is a study of the concept of a high-speed unit usable on high-speed rails in the Czech Republic. In the theoretical part, a research of current high-speed units operating in Europe and Asia is carried out. An evaluation and selection of suitable unit parameters then ensue. In the practical part, the design of the interior of the seven-car unit is presented in a technical drawing and the kinematic envelope is checked in compliance with UIC 505. The work continues with the calculation of suspension parameters including the calculation of natural frequencies. It also includes a conceptual design of the drive and a composite drawing of the traction bogie as well as traction characteristics of the high-speed unit. A secondary objective of the study was to identify and highlight the basic potential problems in the use of internal frame bogie.
Collections
- Diplomové práce - 12120 [430]