Příkon míchadel při nestandardní výšce hladiny kapaliny v nádobě
Power consumption of impellers at non-standard liquid level in tank
Type of document
diplomová prácemaster thesis
Author
Janakiraman Kubendran
Supervisor
Moravec Jiří
Opponent
Skočilas Jan
Field of study
Procesní technikaStudy program
Strojní inženýrstvíInstitutions assigning rank
ústav procesní a zpracovatelské technikyRights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item recordAbstract
Míchání je základním procesem v mnoha průmyslových odvětvích, jako jsou chemikálie, minerály, potraviny, ropa, farmaceutika atd. Spotřeba energie oběžného kola nebo míchadla během míchání bude mít tedy větší dopad na provozní náklady. V této studii je vyvinut model CFD ke studiu spotřeby energie oběžného kola během vypouštění a plnění nádoby. Ke studiu spotřeby energie oběžného kola v různých výškách kapaliny se používá technika více referenčních rámců (MRF), model turbulence SST K-Omega a vícefázový model VOF. Poté jsou výsledky CFD porovnány s experimentálními daty. V této práci je zkoumán vliv výšky kapaliny a rychlosti oběžného kola na spotřebu energie oběžného kola. Mixing is an essential process in many industries such as chemicals, minerals, food, petroleum, pharmaceuticals, etc. Therefore, the power consumption of the impeller or agitator during mixing will have a greater impact on the operating cost. In this study, the CFD model is developed to study the power consumption of the impeller during the draining and filling of the vessel. The multiple reference frame technique (MRF), the SST K-Omega turbulence model, and the VOF multiphase model are used to study the power demand of the impeller at different liquid heights. Then, the CFD results are compared with the experimental data. In this thesis, the effect of liquid height and impeller speed on impeller power consumption is investigated.
Collections
- Diplomové práce - 12118 [150]