Metody stanovení spolupůsobící šířky trámových stropních desek
Methods for determination of the effective width of beam supported slabs
Type of document
bakalářská prácebachelor thesis
Author
Jan Marek
Supervisor
Bílý Petr
Opponent
Novák Josef
Field of study
Konstrukce pozemních stavebStudy program
Stavební inženýrstvíInstitutions assigning rank
katedra betonových a zděných konstrukcíRights
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Show full item recordAbstract
Tato bakalářské práce se zabývá studií spolupůsobící šířky desky a jejím vlivem na návrh podélné výztuže. V úvodních kapitolách je popsána definice spolupůsobící šířky, jaké faktory ovlivňují její velikost a následně možnosti výpočtu její velikosti podle vybraných norem a studie Altana Aygara. Ve vzorovém příkladu je proveden výpočet podle uvedených norem s navržením potřebného množství podélné výztuže a následně jsou výsledky detailněji rozebrány. Ve druhé praktické části se tato práce zabývá možnostmi výpočtu spolupůsobící šířky ve statickém programu SCIA Engineer. Nejdříve jsou popsány metody zadávání T-trámů (žeber) v programu, poté jsou na zvolené konstrukci provedeny tři metody výpočtu pro návrh podélné výztuže T-trámů. Výsledkem je porovnání těchto metod na vliv velikosti spolupůsobící šířky a vnitřních sil pro návrh podélné výztuže. This bachelor thesis deals with the study of the effective flange width and its effect on the design of longitudinal reinforcement. In the introductory chapters, the definition of the effective flange width, what factors influence its size and then the possibilities of calculating its size according to selected standards and the study of Altan Aygar are described. In the example, the calculation according to these standards is performed with the design of the required amount of longitudinal reinforcement and then the results are discussed in more detail. In the second practical part, this thesis deals with the possibilities of calculating the effective flange width in the static program SCIA Engineer. First, the methods of entering T-beams (ribs) in the program are described, then three calculation methods for the design of longitudinal reinforcement of T-beams are performed on the selected structure. The result is a comparison of these methods on the effect of the magnitude of the effective flange width and internal forces for the design of longitudinal reinforcement.
Collections
- Bakalářské práce - 11133 [584]