Miniaturní navigační systém pro bezpilotní létající prostředky
Miniature navigation system for UAS application
Typ dokumentu
diplomová prácemaster thesis
Autor
Grigoris Panagiotis Mantaos
Vedoucí práce
Roháč Jan
Oponent práce
Velychko Vitaliy
Studijní obor
AvionikaStudijní program
Aerospace EngineeringInstituce přidělující hodnost
katedra měřeníPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
This diploma thesis will outline the design and programming of an Inertial Navigation System, dubbed Mini-INS. The completed system will, like most INS platforms, provide as output the 9-DOF state of a host vehicle in terms of Position, Velocity and Attitude (PVA). Specifically, the implementation will focus on the navigational requirements of Unmanned Aerial Systems (UAS). However, no discrimination shall be made on flight mechanics, meaning that the Mini-INS should be a thorough plug-and-play solution for any aerial or land vehicle, be it a fixed-wing drone, a multi-copter, or a caterpillar tracked robot. In the context of this implementation, the system is designed and manufactured from top to bottom. This includes the hardware design of a schematic, its realization on a Printed Circuit Board (PCB), and its programming so that it may execute the functions of an INS. The primary objective, as the title suggests, is to build a navigation system for use by small unmanned vehicles. As a consequence, the focus of the design will be to minimize the size of the PCB footprint, as well as the board's total power consumption. To achieve this, the board utilizes a combination of MEMS sensors and a low-power ARM microprocessor. This diploma thesis will outline the design and programming of an Inertial Navigation System, dubbed Mini-INS. The completed system will, like most INS platforms, provide as output the 9-DOF state of a host vehicle in terms of Position, Velocity and Attitude (PVA). Specifically, the implementation will focus on the navigational requirements of Unmanned Aerial Systems (UAS). However, no discrimination shall be made on flight mechanics, meaning that the Mini-INS should be a thorough plug-and-play solution for any aerial or land vehicle, be it a fixed-wing drone, a multi-copter, or a caterpillar tracked robot. In the context of this implementation, the system is designed and manufactured from top to bottom. This includes the hardware design of a schematic, its realization on a Printed Circuit Board (PCB), and its programming so that it may execute the functions of an INS. The primary objective, as the title suggests, is to build a navigation system for use by small unmanned vehicles. As a consequence, the focus of the design will be to minimize the size of the PCB footprint, as well as the board's total power consumption. To achieve this, the board utilizes a combination of MEMS sensors and a low-power ARM microprocessor.
Kolekce
- Diplomové práce - 13138 [374]
Související záznamy
Zobrazují se záznamy příbuzné na základě názvu, autora a předmětu.
-
ČVUT Navigátor - OS Android klient pro hotelové služby
Autor: Pik Ondřej; Vedoucí práce: Chludil Jiří; Oponent práce: Čermák Ondřej
(České vysoké učení technické v Praze. Vypočetní a informační centrum., 2014-06-27) -
ČVUT Navigátor - WP klient II
Autor: Bezouška Tomáš; Vedoucí práce: Chludil Jiří; Oponent práce: Matyáš Petr
(České vysoké učení technické v Praze. Vypočetní a informační centrum., 2014-06-27) -
Self-navigation of laser beams on injected IFE targets using SBS PCM technology: conceptual design of the method
Autor: Slezák Ondřej; Vedoucí práce: Kálal Milan; Oponent práce: Straka Petr
(České vysoké učení technické v Praze. Vypočetní a informační centrum., 2012-09-26)Self-navigation of laser beams on IFE targets using SBS PCM