Návrh bezpečnostní závěrky pro laserový svazek

Design of a safety shutter for laser beam

Typ dokumentu
diplomová práce
master thesis
Autor
Ebrar Yucel Odabas
Vedoucí práce
Čáp Jiří
Oponent práce
Němcová Šárka
Studijní obor
Přístrojová a řídicí technika
Studijní program
Strojní inženýrství
Instituce přidělující hodnost
ústav přístrojové a řídící techniky


Práva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.html
Vysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznam
Abstrakt
This thesis examines the absorption of a laser beam whose parameters such as wavelength, stroke, pulse duration, operation time have been defined before. The size limits of the safety shutter to be used for the absorption process are predetermined and yield improvements were made without exceeding the size limits. The cooling of the heat generated by the laser was provided by water. This thesis also has 3D drawings, material information and dimensions of all these applications. In addition, it includes other designs and scenarios that can be used for cooling. Solidworks software of SolidWorks Corporation were used for 3D designs and thermal analysis.
 
This thesis examines the absorption of a laser beam whose parameters such as wavelength, stroke, pulse duration, operation time have been defined before. The size limits of the safety shutter to be used for the absorption process are predetermined and yield improvements were made without exceeding the size limits. The cooling of the heat generated by the laser was provided by water. This thesis also has 3D drawings, material information and dimensions of all these applications. In addition, it includes other designs and scenarios that can be used for cooling. Solidworks software of SolidWorks Corporation were used for 3D designs and thermal analysis.
 
URI
http://hdl.handle.net/10467/99280
Zobrazit/otevřít
Kolekce