Show simple item record



dc.date.accessioned2021-03-10T15:47:34Z
dc.date.available2021-03-10T15:47:34Z
dc.date.issued2021
dc.identifier.citationActa Polytechnica. 2021, vol. 61, no. 1, p. 163-173.
dc.identifier.issn1210-2709 (print)
dc.identifier.issn1805-2363 (online)
dc.identifier.urihttp://hdl.handle.net/10467/93824
dc.description.abstractThe aim of this study is to theoretically investigate the effects of design parameters on the static equivalent stress of radial rolling bearings, such as the point contact case for ball bearings and line contact case for roller bearings. The contact pressure, contact area and von Misses stress of bearings are calculated based on geometrical parameters, material parameters and loading parameters by using the developed MATLAB program. To achieve this aim, both the maximum contact pressure pmax and Von Mises effective stress σVM are simulated with respect to design parameters such as varying ball and roller element diameters and varying ball and roller element elasticity modulus. For the point contact case and line contact case, it was concluded that increasing the diameter of ball and roller elements results in reducing the maximum contact pressure pmax Furthermore, increasing the elasticity modulus of the ball and roller elements results in increasing the maximum contact pressure σVM. Furthermore, increasing the elasticity modulus of the ball and roller element results in increasing the maximum contact pressure pmax and Von Mises effective stress σVM because of the decrease of contact area A. The determination of the diameter of the ball and roller elements and the selection of material are crucial and play an effective role during the design process. Therefore, bearing designers and manufacturers should make the bearing geometrical dimensions as large as possible and bearing material as elastic as possible. Furthermore, the stress-based static failure theory can also be used instead of the standard static load carrying capacity calculation. Moreover, Von Mises stress theory is also compatible with the finite element method.en
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.publisherČeské vysoké učení technické v Prazecs
dc.publisherCzech Technical University in Pragueen
dc.relation.ispartofseriesActa Polytechnica
dc.relation.urihttps://ojs.cvut.cz/ojs/index.php/ap/article/view/6861
dc.rightsCreative Commons Attribution 4.0 International Licenseen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.title
dc.typearticleen
dc.date.updated2021-03-10T15:47:34Z
dc.identifier.doi10.14311/AP.2021.61.0163
dc.rights.accessopenAccess
dc.type.statusPeer-reviewed
dc.type.versionpublishedVersion


Files in this item



This item appears in the following Collection(s)

Show simple item record

Creative Commons Attribution 4.0 International License
Except where otherwise noted, this item's license is described as Creative Commons Attribution 4.0 International License