Show simple item record

dc.contributor.authorBeňo , Jaroslav
dc.contributor.authorHilar , Matouš
dc.date.accessioned2017-02-09T08:17:40Z
dc.date.available2017-02-09T08:17:40Z
dc.date.issued2013
dc.identifier.citationActa Polytechnica. 2013, vol. 53, no. 4.
dc.identifier.issn1210-2709 (print)
dc.identifier.issn1805-2363 (online)
dc.identifier.urihttp://hdl.handle.net/10467/67067
dc.description.abstractThe use of precast steel fibre reinforced concrete (SFRC) for tunnel segments is a relatively new application of this material. It was first applied in Italy in the 1980s. However, it did not begin to be widely applied until after 2000. The Czech Technical University in Prague (CTU), together with Metrostav, carried out a study to evaluate the use of this new technology for tunnels in the Czech Republic. The first tests were carried out on small samples (beams and cubes) produced from SFRC to find an appropriate type and an appropriate dosage of fibres. The tests were also used to verify other factors affecting the final product (e.g. production technology). Afterwards, SFRC segments were produced and then tested at the Klokner Institute of CTU. Successful test results confirmed that it was possible to use SFRC segments for Czech transport tunnels. Consequently a 15 m-long section of segmental lining generated from SFRC without steel rebars was constructed as part of line A of the Prague metro.en
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.publisherČeské vysoké učení technické v Prazecs
dc.publisherCzech Technical University in Pragueen
dc.relation.ispartofseriesActa Polytechnica
dc.relation.urihttps://ojs.cvut.cz/ojs/index.php/ap/article/view/1823
dc.rightsCreative Commons Attribution 4.0 International Licenseen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.subjectSteel fibre reinforced concreteen
dc.subjectsegmental tunnel liningen
dc.subjectmechanical excavationen
dc.subjectlaboratory testingen
dc.titleSteel Fibre Reinforced Concrete for Tunnel Lining – Verification by Extensive Laboratory Testing and Numerical Modelling
dc.typearticleen
dc.date.updated2017-02-09T08:17:40Z
dc.rights.accessopenAccess
dc.type.statusPeer-reviewed
dc.type.versionpublishedVersion


Files in this item



This item appears in the following Collection(s)

Show simple item record

Creative Commons Attribution 4.0 International License
Except where otherwise noted, this item's license is described as Creative Commons Attribution 4.0 International License