Nedávno přidané

Zobrazují se záznamy 1-10 z 10

    • AN INTERPOLATION METHOD FOR DETERMINING THE FREQUENCIES OF PARAMETERIZED LARGESCALE STRUCTURES 

      Autor: Nasisi , Salvatore; Valášek , Michael; Vampola , Tomáš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Parametric Model Order Reduction (pMOR) is an emerging category of models developed with the aim of describing reduced first and second-order dynamical systems. The use of a pROM turns out useful in a variety of applications ...
    • OPERATING SPECIFICATIONS OF CATALYTIC CLEANING OF GAS FROM BIOMASS GASIFICATION 

      Autor: Lisý , Martin; Baláš , Marek; Špiláček , Michal; Skála , Zdeněk
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      The paper focuses on the theoretical description of the cleaning of syngas from biomass and waste gasification using catalytic methods, and on the verification of the theory through experiments. The main obstruction to ...
    • MULTILAYER COATINGS Ti/TiN Cr/CrN AND W/WN DEPOSITED BY MAGNETRON SPUTTERING FOR IMPROVEMENT OF ADHESION TO BASE MATERIALS 

      Autor: Horník , Jakub; Krum , Stanislav; Tondl , David; Puchnin , Maxim; Sachr , Pavel; Cvrček , Ladislav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      The paper deals with evaluation of single and multilayer layer PVD coatings based on Cr and Ti widely used in tool application. Additionally, W and WN based coating which are not so widespread were designed and deposited ...
    • FINITE ELEMENT ANALYSIS OF AORTAL BIFURCATION 

      Autor: Kronek , Jakub; Žitný , Rudolf
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Arterial bifurcations loaded by internal pressure represent significant stress concentrators. Increased mechanical stress inside arterial wall probably accelerates pathogenic processes at these places. Stress concentration ...
    • CALCULATION OF STRESS AND DEFORMATION IN FUEL ROD CLADDING DURING PELLETCLADDING INTERACTION 

      Autor: Halabuk , Dávid; Martinec , Jiří
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      The elementary parts of every fuel assembly, and thus of the reactor core, are fuel rods. The main function of cladding is hermetic separation of nuclear fuel from coolant. The fuel rod works in very specific and difficult ...
    • ANALYTICAL METHODS FOR CALCULATING FAN AERODYNAMICS 

      Autor: Dostal , Jan; Kuzel , Jan
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      This paper presents results obtained between 2010 and 2014 in the field of fan aerodynamics at the Department of Composite Technology at the VZLÚ aerospace research and experimental institute in Prague – Letnany. The need ...
    • TREATMENT OF NATURAL GAS BY ADSORPTION OF CO2 

      Autor: Hádková , Kristýna; Tekáč , Viktor; Ciahotný , Karel; Beňo , Zdeněk; Vrbová , Veronika
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Apart from burning, one of the possible uses of natural gas is as a fuel for motor vehicles. There are two types of fuel from natural gas — CNG (Compressed Natural Gas) or LNG (Liquefied Natural Gas). Liquefaction of natural ...
    • A COMPARISON OF THE TENSILE STRENGTH OF PLASTIC PARTS PRODUCED BY A FUSED DEPOSITION MODELING DEVICE 

      Autor: Beniak , Juraj; Križan , Peter; Matúš , Miloš
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      Rapid Prototyping systems are nowadays increasingly used in many areas of industry, not only for producing design models but also for producing parts for final use. We need to know the properties of these parts. When we ...
    • A HARDWAREINTHELOOP SIMULATOR BASED ON REAL SKODA SUPERB VEHICLE AND RTLAB/CARSIM 

      Autor: Biroš , Milan; Kyslan , Karol; Ďurovský , František
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      This paper describes the design and realization of a hardware-in-the-loop simulator made from a real Skoda Superb vehicle. A combination of RT-LAB and CarSim software is used for real-time control and for handling the ...
    • ON THE SPEED OF SOUND IN STEAM 

      Autor: Šafarík , Pavel; Nový , Adam; Jícha , David; Hajšman , Miroslav
      (České vysoké učení technické v PrazeCzech Technical University in Prague, 2015)
      A study of the speed of sound in a pure water substance is presented here. The IAPWS data on the state of water and steam are applied only for investigating the speed of sound for a one-phase medium. A special numerical ...