Slitina NiTi připravená technologií studené kinetizace
NiTi alloy produced by cold spray
Typ dokumentu
bakalářská prácebachelor thesis
Autor
Tomáš Heller
Vedoucí práce
Čížek Jan
Oponent práce
Singh Reeti
Studijní obor
bez oboruStudijní program
Teoretický základ strojního inženýrstvíInstituce přidělující hodnost
ústav materiálového inženýrstvíPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Tato práce se zabývá slitinou NiTi vyrobenou metodou studené kinetizace. Teoretická část práce popisuje principy, vlastnosti a aplikace metody studené kinetizace a dále slitiny NiTi. V experimentální části práce je poté charakterizován vstupní prášek pomocí metod SEM, EDX, XRD a analýzy velikosti částic. Zjištění odhalují nepravidelnou morfologii směsi prášku s částicemi titanu a niklu. V práci je dále připraven a charakterizován odpovídající nástřik, který je hutný a s dobrým rozhraním s podkladem, leč nehomogenní z hlediska chemického a fázového složení, což je právě dáno charakterem vstupního prášku. This thesis investigates the NiTi alloy produced by cold spray. The theoretical part of the thesis describes the principles, properties and applications of the cold spray and the NiTi alloy. The experimental part of the thesis then characterizes the starting powder by SEM, EDX, XRD and particle size analysis. The findings reveal an irregular morphology of the powder mixture with titanium and nickel particles. The corresponding coating is then prepared and characterized, which is dense and with good interface with the substrate, but inhomogeneous in terms of chemical and phase composition, which is precisely due to the nature of the feedstock powder.
Kolekce
- Bakalářské práce - 12132 [150]