Design and development of mainstream capnometer
Design and development of mainstream capnometer
Typ dokumentu
diplomová prácemaster thesis
Autor
Víctor Ortiz Santiago
Vedoucí práce
Kudrna Petr
Oponent práce
Grünes Richard
Studijní obor
Biomedicínské inženýrstvíStudijní program
Biomedicínská a klinická technika (studium v angličtině)Instituce přidělující hodnost
katedra biomedicínské technikyPráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
This thesis deals with the design and construction of a mainstream capnometer for the continuous measurement of carbon dioxide concentration in the patient´s respiratory circuit during mechanical ventilation, performed by an optical sensor using infrared absorption spectroscopy. The device was designed with technical focus on individual components needed for subsequent implementation as an open system, intended to be used in intubated neonates during high frequency ventilation. The data obtained from the sensor is processed externally using LabVIEW software, displaying the results as capnography curves with real-time changes of CO2 concentration. The main goals were to verify the functionality of the final implemented device to measure changes in CO2 concentration, create the characteristic calibration curve of the device from the results of the measurements and verify if it is usable in high frequency ventilation modes. For these purposes, static and dynamic tests were performed and the results were analysed and compared using a reference capnometer. This thesis deals with the design and construction of a mainstream capnometer for the continuous measurement of carbon dioxide concentration in the patient´s respiratory circuit during mechanical ventilation, performed by an optical sensor using infrared absorption spectroscopy. The device was designed with technical focus on individual components needed for subsequent implementation as an open system, intended to be used in intubated neonates during high frequency ventilation. The data obtained from the sensor is processed externally using LabVIEW software, displaying the results as capnography curves with real-time changes of CO2 concentration. The main goals were to verify the functionality of the final implemented device to measure changes in CO2 concentration, create the characteristic calibration curve of the device from the results of the measurements and verify if it is usable in high frequency ventilation modes. For these purposes, static and dynamic tests were performed and the results were analysed and compared using a reference capnometer.
Kolekce
- Diplomové práce - 17110 [1011]