Možnosti nedestruktivního hodnocení kvality difúzních spojů
Possibilities of non-destructive evaluation of the quality of diffusion joints
Typ dokumentu
disertační prácedoctoral thesis
Autor
Pavel Nachtnebl
Vedoucí práce
Kolařík Ladislav
Oponent práce
Hlavatý Ivo
Studijní obor
Strojírenská technologieStudijní program
Strojní inženýrstvíInstituce přidělující hodnost
ústav strojírenské technologiePráva
A university thesis is a work protected by the Copyright Act. Extracts, copies and transcripts of the thesis are allowed for personal use only and at one?s own expense. The use of thesis should be in compliance with the Copyright Act http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf and the citation ethics http://knihovny.cvut.cz/vychova/vskp.htmlVysokoškolská závěrečná práce je dílo chráněné autorským zákonem. Je možné pořizovat z něj na své náklady a pro svoji osobní potřebu výpisy, opisy a rozmnoženiny. Jeho využití musí být v souladu s autorským zákonem http://www.mkcr.cz/assets/autorske-pravo/01-3982006.pdf a citační etikou http://knihovny.cvut.cz/vychova/vskp.html
Metadata
Zobrazit celý záznamAbstrakt
Metodou difúzního spojování ve vakuu byly svařeny homogenní spoje z hliníkové slitiny AlMg3 (EN AW-5754), aby byly vyzkoušeny vhodné metody nedestruktivního zkoušení difúzních spojů a analyzovány difúzní procesy z hlediska tvorby difúzních rozhraní ve spojovaných vzorcích. Slitina AlMg3 (EN AW-5754) byla zvolena, aby výsledky difúzních procesů mohly být snadno vztaženy k výsledkům nedestruktivní zkoušek. Disertační práce se ve své rešeršní, teoretické části zabývá principem difúzního spojování slitin, popisem a zmapováním hlavních světových trendů v této oblasti a současnými možnostmi hodnocení kvality provedení difúzních spojů. Ve výzkumné části je popsán způsob přípravy experimentálních vzorků, popis zařízení pro difúzní spojování použitých při experimentu a kvalitativním vyhodnocením provedených difúzních spojů. V závěru disertační práce hodnotí možnost aplikace vybraných nedestruktivních metod testování pro technologii difúzního spojování a dále analyzuje difúzní spoje hliníkové slitiny AlMg3 (EN AW-5754). Homogeneous diffusion bonded joints of aluminium alloy AlMg3 (EN AW-5754) were welded using the diffusion bonding in vacuum. Research was focused on testing suitable methods of non-destructive testing of diffusion joints and to analyse diffusion processes in terms of the formation of diffusion interfaces in the bonded samples. The AlMg3 (EN AW-5754) alloy was chosen so that the results of diffusion processes could be easily related to the results of non-destructive tests. Theoretical part of the dissertation deals with the principle of diffusion bonding of alloys, description, mapping of the main world trends in this area and the current possibilities of evaluating the quality of diffusion joints. The research part describes the method of preparation of experimental samples, a description of the devices for diffusion bonding used in the experiment and the qualitative evaluation of the diffusion joints performed. At the end the dissertation evaluates the possibility of application of selected non-destructive testing methods for diffusion bonding technology and further analyses the diffusion joints of aluminium alloy AlMg3 (EN AW-5754).
Kolekce
- Disertační práce - 12000 [298]