Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to False |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.178 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 3 | |
expected_value | 2 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.131 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 1 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.134 s |
Description | ||
---|---|---|
Set point machine V03 to the RIGHT position | ||
Action | ||
Command | V03.test.setRight | |
Description | Set the position command node of V03 TEST node to True | |
Monitored value | ||
Source | V03.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V03.status | |
Description | Value at the control status node of V03 | |
Evaluation details | ||
Success value | 2 (V03 is in the RIGHT position) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 48 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 2 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 50 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 3.196 s |
Description | ||
---|---|---|
Set point machine V03 to the MIDDLE position | ||
Action | ||
Command | V03.test.setMiddle | |
Description | Set the position command node of V03 TEST node to True | |
Monitored value | ||
Source | V03.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V03.status | |
Description | Value at the control status node of V03 | |
Evaluation details | ||
Success value | 4 (V03 is in the MIDDLE position) | |
Check mode | Equal to | |
Mask | 0b100 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 48 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 4 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 52 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 4 | |
expected_value | 4 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 5.300 s |
Description | ||
---|---|---|
Set point machine V03 to the LEFT position | ||
Action | ||
Command | V03.test.setLeft | |
Description | Set the position command node of V03 TEST node to True | |
Monitored value | ||
Source | V03.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V03.status | |
Description | Value at the control status node of V03 | |
Evaluation details | ||
Success value | 1 (V03 is in the LEFT position) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 49 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.689 s |
Description | ||
---|---|---|
Reset V03 to default state (position left, no manual lever in socket, not blocked, no output error) | ||
Action | ||
Command | V03.test.reset | |
Description | Set point machine V03 reset test node to True | |
Monitored value | ||
Source | V03.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V03.status | |
Description | Value at the control status node of V03 | |
Evaluation details | ||
Success value | 1 (V03 is reset) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 65537 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.470 s |
Description | ||
---|---|---|
Set point machine V03 to the RIGHT position | ||
Action | ||
Command | V03.control.cmdMoveRight | |
Description | Set the position command node of V03 CONTROL node to True | |
Monitored value | ||
Source | V03.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V03.status | |
Description | Value at the control status node of V03 | |
Evaluation details | ||
Success value | 2 (V03 is in the RIGHT position) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 65792 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 258 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 2 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.321 s |
Description | ||
---|---|---|
Set point machine V03 to the LEFT position | ||
Action | ||
Command | V03.control.cmdMoveLeft | |
Description | Set the position command node of V03 CONTROL node to True | |
Monitored value | ||
Source | V03.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V03.status | |
Description | Value at the control status node of V03 | |
Evaluation details | ||
Success value | 1 (V03 is in the LEFT position) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 258 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 256 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 257 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 1 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 3.108 s |
Description | ||
---|---|---|
Set point machine V03 position to MIDDLE with the direct sensor value input | ||
Action | ||
Command | V03.test.outLeft01.setFalse + V03.test.outRight01.setFalse | |
Description | Set the tongue position sensors at the test node to False | |
Monitored value | ||
Source | V03.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V03.status | |
Description | Value at the control status node of V03 | |
Evaluation details | ||
Success value | 4 (V03 is in the MIDDLE position) | |
Check mode | Equal to | |
Mask | 0b100 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 65536 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 4 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 65556 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 4 | |
expected_value | 4 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 5.297 s |
Description | ||
---|---|---|
Set point machine V03 position to ERROR with the direct sensor value input | ||
Action | ||
Command | V03.test.outLeft0X.setTrue + V03.test.outRight0X.setTrue | |
Description | Set all the tongue position sensors at the test nodes to True | |
Monitored value | ||
Source | V03.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V03.status | |
Description | Value at the control status node of V03 | |
Evaluation details | ||
Success value | 1073741824 (V03 is in the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 1073807376 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.392 s |
Description | ||
---|---|---|
Reset V03 to default state (position left, no manual lever in socket, not blocked, no output error) | ||
Action | ||
Command | V03.test.reset | |
Description | Set point machine V03 reset test node to True | |
Monitored value | ||
Source | V03.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V03.status | |
Description | Value at the control status node of V03 | |
Evaluation details | ||
Success value | 1 (V03 is reset) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V03.status to 65552 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.384 s |
Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to False |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.180 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 3 | |
expected_value | 2 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.138 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 1 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.127 s |
Description | ||
---|---|---|
Set point machine V04 to the RIGHT position | ||
Action | ||
Command | V04.test.setRight | |
Description | Set the position command node of V04 TEST node to True | |
Monitored value | ||
Source | V04.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V04.status | |
Description | Value at the control status node of V04 | |
Evaluation details | ||
Success value | 2 (V04 is in the RIGHT position) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 48 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 2 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 50 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 3.257 s |
Description | ||
---|---|---|
Set point machine V04 to the MIDDLE position | ||
Action | ||
Command | V04.test.setMiddle | |
Description | Set the position command node of V04 TEST node to True | |
Monitored value | ||
Source | V04.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V04.status | |
Description | Value at the control status node of V04 | |
Evaluation details | ||
Success value | 4 (V04 is in the MIDDLE position) | |
Check mode | Equal to | |
Mask | 0b100 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 48 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 4 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 52 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 4 | |
expected_value | 4 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 5.394 s |
Description | ||
---|---|---|
Set point machine V04 to the LEFT position | ||
Action | ||
Command | V04.test.setLeft | |
Description | Set the position command node of V04 TEST node to True | |
Monitored value | ||
Source | V04.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V04.status | |
Description | Value at the control status node of V04 | |
Evaluation details | ||
Success value | 1 (V04 is in the LEFT position) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 49 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.739 s |
Description | ||
---|---|---|
Reset V04 to default state (position left, no manual lever in socket, not blocked, no output error) | ||
Action | ||
Command | V04.test.reset | |
Description | Set point machine V04 reset test node to True | |
Monitored value | ||
Source | V04.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V04.status | |
Description | Value at the control status node of V04 | |
Evaluation details | ||
Success value | 1 (V04 is reset) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 65537 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.560 s |
Description | ||
---|---|---|
Set point machine V04 to the RIGHT position | ||
Action | ||
Command | V04.control.cmdMoveRight | |
Description | Set the position command node of V04 CONTROL node to True | |
Monitored value | ||
Source | V04.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V04.status | |
Description | Value at the control status node of V04 | |
Evaluation details | ||
Success value | 2 (V04 is in the RIGHT position) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 65792 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 258 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 2 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.233 s |
Description | ||
---|---|---|
Set point machine V04 to the LEFT position | ||
Action | ||
Command | V04.control.cmdMoveLeft | |
Description | Set the position command node of V04 CONTROL node to True | |
Monitored value | ||
Source | V04.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V04.status | |
Description | Value at the control status node of V04 | |
Evaluation details | ||
Success value | 1 (V04 is in the LEFT position) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 258 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 256 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 257 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 1 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 3.009 s |
Description | ||
---|---|---|
Set point machine V04 position to MIDDLE with the direct sensor value input | ||
Action | ||
Command | V04.test.outLeft01.setFalse + V04.test.outRight01.setFalse | |
Description | Set the tongue position sensors at the test node to False | |
Monitored value | ||
Source | V04.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V04.status | |
Description | Value at the control status node of V04 | |
Evaluation details | ||
Success value | 4 (V04 is in the MIDDLE position) | |
Check mode | Equal to | |
Mask | 0b100 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 65536 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 4 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 65556 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 4 | |
expected_value | 4 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 5.425 s |
Description | ||
---|---|---|
Set point machine V04 position to ERROR with the direct sensor value input | ||
Action | ||
Command | V04.test.outLeft0X.setTrue + V04.test.outRight0X.setTrue | |
Description | Set all the tongue position sensors at the test nodes to True | |
Monitored value | ||
Source | V04.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V04.status | |
Description | Value at the control status node of V04 | |
Evaluation details | ||
Success value | 1073741824 (V04 is in the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 1073807376 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.417 s |
Description | ||
---|---|---|
Reset V04 to default state (position left, no manual lever in socket, not blocked, no output error) | ||
Action | ||
Command | V04.test.reset | |
Description | Set point machine V04 reset test node to True | |
Monitored value | ||
Source | V04.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V04.status | |
Description | Value at the control status node of V04 | |
Evaluation details | ||
Success value | 1 (V04 is reset) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V04.status to 65552 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.369 s |
Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to False |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.182 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 3 | |
expected_value | 2 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.142 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 1 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.124 s |
Description | ||
---|---|---|
Set point machine V05 to the RIGHT position | ||
Action | ||
Command | V05.test.setRight | |
Description | Set the position command node of V05 TEST node to True | |
Monitored value | ||
Source | V05.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V05.status | |
Description | Value at the control status node of V05 | |
Evaluation details | ||
Success value | 2 (V05 is in the RIGHT position) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 48 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 2 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 50 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 3.308 s |
Description | ||
---|---|---|
Set point machine V05 to the MIDDLE position | ||
Action | ||
Command | V05.test.setMiddle | |
Description | Set the position command node of V05 TEST node to True | |
Monitored value | ||
Source | V05.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V05.status | |
Description | Value at the control status node of V05 | |
Evaluation details | ||
Success value | 4 (V05 is in the MIDDLE position) | |
Check mode | Equal to | |
Mask | 0b100 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 48 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 4 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 52 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 4 | |
expected_value | 4 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 5.443 s |
Description | ||
---|---|---|
Set point machine V05 to the LEFT position | ||
Action | ||
Command | V05.test.setLeft | |
Description | Set the position command node of V05 TEST node to True | |
Monitored value | ||
Source | V05.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V05.status | |
Description | Value at the control status node of V05 | |
Evaluation details | ||
Success value | 1 (V05 is in the LEFT position) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 49 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.020 s |
Description | ||
---|---|---|
Reset V05 to default state (position left, no manual lever in socket, not blocked, no output error) | ||
Action | ||
Command | V05.test.reset | |
Description | Set point machine V05 reset test node to True | |
Monitored value | ||
Source | V05.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V05.status | |
Description | Value at the control status node of V05 | |
Evaluation details | ||
Success value | 1 (V05 is reset) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 65537 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.690 s |
Description | ||
---|---|---|
Set point machine V05 to the RIGHT position | ||
Action | ||
Command | V05.control.cmdMoveRight | |
Description | Set the position command node of V05 CONTROL node to True | |
Monitored value | ||
Source | V05.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V05.status | |
Description | Value at the control status node of V05 | |
Evaluation details | ||
Success value | 2 (V05 is in the RIGHT position) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 65792 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 258 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 2 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.314 s |
Description | ||
---|---|---|
Set point machine V05 to the LEFT position | ||
Action | ||
Command | V05.control.cmdMoveLeft | |
Description | Set the position command node of V05 CONTROL node to True | |
Monitored value | ||
Source | V05.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V05.status | |
Description | Value at the control status node of V05 | |
Evaluation details | ||
Success value | 1 (V05 is in the LEFT position) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 258 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 256 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 257 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 1 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.928 s |
Description | ||
---|---|---|
Set point machine V05 position to MIDDLE with the direct sensor value input | ||
Action | ||
Command | V05.test.outLeft01.setFalse + V05.test.outRight01.setFalse | |
Description | Set the tongue position sensors at the test node to False | |
Monitored value | ||
Source | V05.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V05.status | |
Description | Value at the control status node of V05 | |
Evaluation details | ||
Success value | 4 (V05 is in the MIDDLE position) | |
Check mode | Equal to | |
Mask | 0b100 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 65536 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 4 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 65552 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 4 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 65556 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 4 | |
expected_value | 4 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 5.450 s |
Description | ||
---|---|---|
Set point machine V05 position to ERROR with the direct sensor value input | ||
Action | ||
Command | V05.test.outLeft0X.setTrue + V05.test.outRight0X.setTrue | |
Description | Set all the tongue position sensors at the test nodes to True | |
Monitored value | ||
Source | V05.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V05.status | |
Description | Value at the control status node of V05 | |
Evaluation details | ||
Success value | 1073741824 (V05 is in the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 1073807376 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.377 s |
Description | ||
---|---|---|
Reset V05 to default state (position left, no manual lever in socket, not blocked, no output error) | ||
Action | ||
Command | V05.test.reset | |
Description | Set point machine V05 reset test node to True | |
Monitored value | ||
Source | V05.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V05.status | |
Description | Value at the control status node of V05 | |
Evaluation details | ||
Success value | 1 (V05 is reset) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V05.status to 65552 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.339 s |
Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to False |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.185 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 3 | |
expected_value | 2 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.143 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 1 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.123 s |
Description | ||
---|---|---|
Set point machine V06 to the RIGHT position | ||
Action | ||
Command | V06.test.setRight | |
Description | Set the position command node of V06 TEST node to True | |
Monitored value | ||
Source | V06.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V06.status | |
Description | Value at the control status node of V06 | |
Evaluation details | ||
Success value | 2 (V06 is in the RIGHT position) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 48 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 2 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 50 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 3.255 s |
Description | ||
---|---|---|
Set point machine V06 to the MIDDLE position | ||
Action | ||
Command | V06.test.setMiddle | |
Description | Set the position command node of V06 TEST node to True | |
Monitored value | ||
Source | V06.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V06.status | |
Description | Value at the control status node of V06 | |
Evaluation details | ||
Success value | 4 (V06 is in the MIDDLE position) | |
Check mode | Equal to | |
Mask | 0b100 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 48 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 4 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 52 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 4 | |
expected_value | 4 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 5.393 s |
Description | ||
---|---|---|
Set point machine V06 to the LEFT position | ||
Action | ||
Command | V06.test.setLeft | |
Description | Set the position command node of V06 TEST node to True | |
Monitored value | ||
Source | V06.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V06.status | |
Description | Value at the control status node of V06 | |
Evaluation details | ||
Success value | 1 (V06 is in the LEFT position) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 49 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.842 s |
Description | ||
---|---|---|
Reset V06 to default state (position left, no manual lever in socket, not blocked, no output error) | ||
Action | ||
Command | V06.test.reset | |
Description | Set point machine V06 reset test node to True | |
Monitored value | ||
Source | V06.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V06.status | |
Description | Value at the control status node of V06 | |
Evaluation details | ||
Success value | 1 (V06 is reset) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 65536 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 65537 |
---|
event | Test passed | |
---|---|---|
duration | 0.452 s |
Description | ||
---|---|---|
Set point machine V06 to the RIGHT position | ||
Action | ||
Command | V06.control.cmdMoveRight | |
Description | Set the position command node of V06 CONTROL node to True | |
Monitored value | ||
Source | V06.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V06.status | |
Description | Value at the control status node of V06 | |
Evaluation details | ||
Success value | 2 (V06 is in the RIGHT position) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 65792 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 258 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 2 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.343 s |
Description | ||
---|---|---|
Set point machine V06 to the LEFT position | ||
Action | ||
Command | V06.control.cmdMoveLeft | |
Description | Set the position command node of V06 CONTROL node to True | |
Monitored value | ||
Source | V06.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V06.status | |
Description | Value at the control status node of V06 | |
Evaluation details | ||
Success value | 1 (V06 is in the LEFT position) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 258 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 256 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 257 |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 1 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.904 s |
Description | ||
---|---|---|
Set point machine V06 position to MIDDLE with the direct sensor value input | ||
Action | ||
Command | V06.test.outLeft01.setFalse + V06.test.outRight01.setFalse | |
Description | Set the tongue position sensors at the test node to False | |
Monitored value | ||
Source | V06.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V06.status | |
Description | Value at the control status node of V06 | |
Evaluation details | ||
Success value | 4 (V06 is in the MIDDLE position) | |
Check mode | Equal to | |
Mask | 0b100 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 65536 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 4 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 65556 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 4 | |
expected_value | 4 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 5.420 s |
Description | ||
---|---|---|
Set point machine V06 position to ERROR with the direct sensor value input | ||
Action | ||
Command | V06.test.outLeft0X.setTrue + V06.test.outRight0X.setTrue | |
Description | Set all the tongue position sensors at the test nodes to True | |
Monitored value | ||
Source | V06.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V06.status | |
Description | Value at the control status node of V06 | |
Evaluation details | ||
Success value | 1073741824 (V06 is in the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 1073807376 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.432 s |
Description | ||
---|---|---|
Reset V06 to default state (position left, no manual lever in socket, not blocked, no output error) | ||
Action | ||
Command | V06.test.reset | |
Description | Set point machine V06 reset test node to True | |
Monitored value | ||
Source | V06.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V06.status | |
Description | Value at the control status node of V06 | |
Evaluation details | ||
Success value | 1 (V06 is reset) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V06.status to 65553 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.424 s |
Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to False |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.193 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 3 | |
expected_value | 2 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.137 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 1 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.120 s |
Description | ||
---|---|---|
Set point machine V07 to the RIGHT position | ||
Action | ||
Command | V07.test.setRight | |
Description | Set the position command node of V07 TEST node to True | |
Monitored value | ||
Source | V07.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V07.status | |
Description | Value at the control status node of V07 | |
Evaluation details | ||
Success value | 2 (V07 is in the RIGHT position) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V07.status to 48 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 2 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V07.status to 50 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 3.293 s |
Description | ||
---|---|---|
Set point machine V07 to the MIDDLE position | ||
Action | ||
Command | V07.test.setMiddle | |
Description | Set the position command node of V07 TEST node to True | |
Monitored value | ||
Source | V07.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V07.status | |
Description | Value at the control status node of V07 | |
Evaluation details | ||
Success value | 4 (V07 is in the MIDDLE position) | |
Check mode | Equal to | |
Mask | 0b100 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V07.status to 48 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 4 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V07.status to 52 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 4 | |
expected_value | 4 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 5.444 s |
Description | ||
---|---|---|
Set point machine V07 to the LEFT position | ||
Action | ||
Command | V07.test.setLeft | |
Description | Set the position command node of V07 TEST node to True | |
Monitored value | ||
Source | V07.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V07.status | |
Description | Value at the control status node of V07 | |
Evaluation details | ||
Success value | 1 (V07 is in the LEFT position) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 | |
Custom start conditions | ['Motor moving action has finished'] | |
Custom error conditions | ['Manual lever is not in the socket'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.PointMachine.PME.V07.status to 49 |
---|
event | evaluated "motor_not_moving" start_condition function | |
---|---|---|
description | Motor moving action has finished | |
result | True |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.035 s |
Description | ||
---|---|---|
Reset V07 to default state (position left, no manual lever in socket, not blocked, no output error) | ||
Action | ||
Command | V07.test.reset | |
Description | Set point machine V07 reset test node to True | |
Monitored value | ||
Source | V07.control.status | |
Server address | ns=6;s=::Z02:OPC.PointMachine.PME.V07.status | |
Description | Value at the control status node of V07 | |
Evaluation details | ||
Success value | 1 (V07 is reset) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 10 |