Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.143 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 2 | |
value_match | False |
event | datachange event at ns=6;s=::Z02:OPC.Zone.status to 514 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.230 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Zone.status to 513 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.085 s |
Description | ||
---|---|---|
Activate detector 1TC21 and check if it has been occupied | ||
Action | ||
Command | 1TC21.test.set_true() | |
Description | Write "True" to the test node "setTrue" of detector 1TC21 | |
Monitored value | ||
Source | 1TC21.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status | |
Description | Value at the control status node of detector 1TC21 | |
Evaluation details | ||
Success value | 1 (detector 1TC21 has switched to the OCCUPIED state) | |
Error value | 536870912 (detector 1TC21 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 0'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status to 1 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.249 s |
Description | ||
---|---|---|
Deactivate detector 1TC21 and check if it has been released | ||
Action | ||
Command | 1TC21.test.set_false() | |
Description | Write "True" to the test node "setFalse" of detector 1TC21 | |
Monitored value | ||
Source | 1TC21.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status | |
Description | Value at the control status node of detector 1TC21 | |
Evaluation details | ||
Success value | 0 (detector 1TC21 has switched to the FREE state) | |
Error value | 536870912 (detector 1TC21 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 1'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | evaluated "register_release" on_success function | |
---|---|---|
description | register_release | |
result | None |
event | Test passed | |
---|---|---|
duration | 2.022 s |
Description | ||
---|---|---|
Activate detector 1TC21 and check if it has been occupied | ||
Action | ||
Command | 1TC21.test.set_true() | |
Description | Write "True" to the test node "setTrue" of detector 1TC21 | |
Monitored value | ||
Source | 1TC21.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status | |
Description | Value at the control status node of detector 1TC21 | |
Evaluation details | ||
Success value | 1 (detector 1TC21 has switched to the OCCUPIED state) | |
Error value | 536870912 (detector 1TC21 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 0'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status to 1 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.185 s |
Description | ||
---|---|---|
Set detector 1TC21 status to ERROR with the direct sensor value input | ||
Action | ||
Command | 1TC21.test.outNO.setTrue + 1TC21.test.outNC.setTrue | |
Description | Set both OutNO and OutNC complementary test node signals to True | |
Monitored value | ||
Source | 1TC21.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status | |
Description | Value at the control status node of 1TC21 | |
Evaluation details | ||
Success value | 1073741824 (1TC21 is in the "errorInputCompl" state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status to 1073741825 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.637 s |
Description | ||
---|---|---|
Reset 1TC21 to default state (state FALSE, outNO = 0, outNC = 1, send reset to both outputs and unlock the value) | ||
Action | ||
Command | 1TC21.test.reset | |
Description | Set detector 1TC21 reset test node to True | |
Monitored value | ||
Source | 1TC21.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status | |
Description | Value at the control status node of 1TC21 | |
Evaluation details | ||
Success value | 0 (1TC21 is reset) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.186 s |
Description | ||
---|---|---|
Set detector 1TC21 status to ERROR with the direct sensor value input | ||
Action | ||
Command | 1TC21.test.outNO.setFalse + 1TC21.test.outNC.setFalse | |
Description | Set both OutNO and OutNC complementary test node signals to False | |
Monitored value | ||
Source | 1TC21.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status | |
Description | Value at the control status node of 1TC21 | |
Evaluation details | ||
Success value | 1073741824 (1TC21 is in the "errorInputCompl" state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status to 1073741825 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.258 s |
Description | ||
---|---|---|
Reset 1TC21 to default state (state FALSE, outNO = 0, outNC = 1, send reset to both outputs and unlock the value) | ||
Action | ||
Command | 1TC21.test.reset | |
Description | Set detector 1TC21 reset test node to True | |
Monitored value | ||
Source | 1TC21.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status | |
Description | Value at the control status node of 1TC21 | |
Evaluation details | ||
Success value | 0 (1TC21 is reset) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC21_1.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.647 s |
Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.150 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Zone.status to 514 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 2 | |
value_match | False |
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.245 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Zone.status to 513 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.065 s |
Description | ||
---|---|---|
Activate detector 2TC01 and check if it has been occupied | ||
Action | ||
Command | 2TC01.test.set_true() | |
Description | Write "True" to the test node "setTrue" of detector 2TC01 | |
Monitored value | ||
Source | 2TC01.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status | |
Description | Value at the control status node of detector 2TC01 | |
Evaluation details | ||
Success value | 1 (detector 2TC01 has switched to the OCCUPIED state) | |
Error value | 536870912 (detector 2TC01 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 0'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status to 1 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.183 s |
Description | ||
---|---|---|
Deactivate detector 2TC01 and check if it has been released | ||
Action | ||
Command | 2TC01.test.set_false() | |
Description | Write "True" to the test node "setFalse" of detector 2TC01 | |
Monitored value | ||
Source | 2TC01.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status | |
Description | Value at the control status node of detector 2TC01 | |
Evaluation details | ||
Success value | 0 (detector 2TC01 has switched to the FREE state) | |
Error value | 536870912 (detector 2TC01 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 1'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | evaluated "register_release" on_success function | |
---|---|---|
description | register_release | |
result | None |
event | Test passed | |
---|---|---|
duration | 2.000 s |
Description | ||
---|---|---|
Activate detector 2TC01 and check if it has been occupied | ||
Action | ||
Command | 2TC01.test.set_true() | |
Description | Write "True" to the test node "setTrue" of detector 2TC01 | |
Monitored value | ||
Source | 2TC01.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status | |
Description | Value at the control status node of detector 2TC01 | |
Evaluation details | ||
Success value | 1 (detector 2TC01 has switched to the OCCUPIED state) | |
Error value | 536870912 (detector 2TC01 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 0'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status to 1 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.259 s |
Description | ||
---|---|---|
Set detector 2TC01 status to ERROR with the direct sensor value input | ||
Action | ||
Command | 2TC01.test.outNO.setTrue + 2TC01.test.outNC.setTrue | |
Description | Set both OutNO and OutNC complementary test node signals to True | |
Monitored value | ||
Source | 2TC01.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status | |
Description | Value at the control status node of 2TC01 | |
Evaluation details | ||
Success value | 1073741824 (2TC01 is in the "errorInputCompl" state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status to 1073741825 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.636 s |
Description | ||
---|---|---|
Reset 2TC01 to default state (state FALSE, outNO = 0, outNC = 1, send reset to both outputs and unlock the value) | ||
Action | ||
Command | 2TC01.test.reset | |
Description | Set detector 2TC01 reset test node to True | |
Monitored value | ||
Source | 2TC01.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status | |
Description | Value at the control status node of 2TC01 | |
Evaluation details | ||
Success value | 0 (2TC01 is reset) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.199 s |
Description | ||
---|---|---|
Set detector 2TC01 status to ERROR with the direct sensor value input | ||
Action | ||
Command | 2TC01.test.outNO.setFalse + 2TC01.test.outNC.setFalse | |
Description | Set both OutNO and OutNC complementary test node signals to False | |
Monitored value | ||
Source | 2TC01.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status | |
Description | Value at the control status node of 2TC01 | |
Evaluation details | ||
Success value | 1073741824 (2TC01 is in the "errorInputCompl" state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status to 1073741825 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.195 s |
Description | ||
---|---|---|
Reset 2TC01 to default state (state FALSE, outNO = 0, outNC = 1, send reset to both outputs and unlock the value) | ||
Action | ||
Command | 2TC01.test.reset | |
Description | Set detector 2TC01 reset test node to True | |
Monitored value | ||
Source | 2TC01.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status | |
Description | Value at the control status node of 2TC01 | |
Evaluation details | ||
Success value | 0 (2TC01 is reset) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC01.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.495 s |
Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to False |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.195 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Zone.status to 514 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.120 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.085 s |
Description | ||
---|---|---|
Activate detector 2TC02 and check if it has been occupied | ||
Action | ||
Command | 2TC02.test.set_true() | |
Description | Write "True" to the test node "setTrue" of detector 2TC02 | |
Monitored value | ||
Source | 2TC02.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status | |
Description | Value at the control status node of detector 2TC02 | |
Evaluation details | ||
Success value | 1 (detector 2TC02 has switched to the OCCUPIED state) | |
Error value | 536870912 (detector 2TC02 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 0'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status to 1 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.234 s |
Description | ||
---|---|---|
Deactivate detector 2TC02 and check if it has been released | ||
Action | ||
Command | 2TC02.test.set_false() | |
Description | Write "True" to the test node "setFalse" of detector 2TC02 | |
Monitored value | ||
Source | 2TC02.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status | |
Description | Value at the control status node of detector 2TC02 | |
Evaluation details | ||
Success value | 0 (detector 2TC02 has switched to the FREE state) | |
Error value | 536870912 (detector 2TC02 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 1'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | evaluated "register_release" on_success function | |
---|---|---|
description | register_release | |
result | None |
event | Test passed | |
---|---|---|
duration | 2.011 s |
Description | ||
---|---|---|
Activate detector 2TC02 and check if it has been occupied | ||
Action | ||
Command | 2TC02.test.set_true() | |
Description | Write "True" to the test node "setTrue" of detector 2TC02 | |
Monitored value | ||
Source | 2TC02.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status | |
Description | Value at the control status node of detector 2TC02 | |
Evaluation details | ||
Success value | 1 (detector 2TC02 has switched to the OCCUPIED state) | |
Error value | 536870912 (detector 2TC02 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 0'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status to 1 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.264 s |
Description | ||
---|---|---|
Set detector 2TC02 status to ERROR with the direct sensor value input | ||
Action | ||
Command | 2TC02.test.outNO.setTrue + 2TC02.test.outNC.setTrue | |
Description | Set both OutNO and OutNC complementary test node signals to True | |
Monitored value | ||
Source | 2TC02.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status | |
Description | Value at the control status node of 2TC02 | |
Evaluation details | ||
Success value | 1073741824 (2TC02 is in the "errorInputCompl" state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status to 1073741825 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.558 s |
Description | ||
---|---|---|
Reset 2TC02 to default state (state FALSE, outNO = 0, outNC = 1, send reset to both outputs and unlock the value) | ||
Action | ||
Command | 2TC02.test.reset | |
Description | Set detector 2TC02 reset test node to True | |
Monitored value | ||
Source | 2TC02.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status | |
Description | Value at the control status node of 2TC02 | |
Evaluation details | ||
Success value | 0 (2TC02 is reset) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.857 s |
Description | ||
---|---|---|
Set detector 2TC02 status to ERROR with the direct sensor value input | ||
Action | ||
Command | 2TC02.test.outNO.setFalse + 2TC02.test.outNC.setFalse | |
Description | Set both OutNO and OutNC complementary test node signals to False | |
Monitored value | ||
Source | 2TC02.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status | |
Description | Value at the control status node of 2TC02 | |
Evaluation details | ||
Success value | 1073741824 (2TC02 is in the "errorInputCompl" state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status to 1073741825 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.182 s |
Description | ||
---|---|---|
Reset 2TC02 to default state (state FALSE, outNO = 0, outNC = 1, send reset to both outputs and unlock the value) | ||
Action | ||
Command | 2TC02.test.reset | |
Description | Set detector 2TC02 reset test node to True | |
Monitored value | ||
Source | 2TC02.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status | |
Description | Value at the control status node of 2TC02 | |
Evaluation details | ||
Success value | 0 (2TC02 is reset) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC02.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.865 s |
Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to False |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.211 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Zone.status to 514 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.146 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.066 s |
Description | ||
---|---|---|
Activate detector 2TC03 and check if it has been occupied | ||
Action | ||
Command | 2TC03.test.set_true() | |
Description | Write "True" to the test node "setTrue" of detector 2TC03 | |
Monitored value | ||
Source | 2TC03.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status | |
Description | Value at the control status node of detector 2TC03 | |
Evaluation details | ||
Success value | 1 (detector 2TC03 has switched to the OCCUPIED state) | |
Error value | 536870912 (detector 2TC03 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 0'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status to 1 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.169 s |
Description | ||
---|---|---|
Deactivate detector 2TC03 and check if it has been released | ||
Action | ||
Command | 2TC03.test.set_false() | |
Description | Write "True" to the test node "setFalse" of detector 2TC03 | |
Monitored value | ||
Source | 2TC03.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status | |
Description | Value at the control status node of detector 2TC03 | |
Evaluation details | ||
Success value | 0 (detector 2TC03 has switched to the FREE state) | |
Error value | 536870912 (detector 2TC03 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 1'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | evaluated "register_release" on_success function | |
---|---|---|
description | register_release | |
result | None |
event | Test passed | |
---|---|---|
duration | 1.993 s |
Description | ||
---|---|---|
Activate detector 2TC03 and check if it has been occupied | ||
Action | ||
Command | 2TC03.test.set_true() | |
Description | Write "True" to the test node "setTrue" of detector 2TC03 | |
Monitored value | ||
Source | 2TC03.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status | |
Description | Value at the control status node of detector 2TC03 | |
Evaluation details | ||
Success value | 1 (detector 2TC03 has switched to the OCCUPIED state) | |
Error value | 536870912 (detector 2TC03 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 0'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status to 1 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.845 s |
Description | ||
---|---|---|
Set detector 2TC03 status to ERROR with the direct sensor value input | ||
Action | ||
Command | 2TC03.test.outNO.setTrue + 2TC03.test.outNC.setTrue | |
Description | Set both OutNO and OutNC complementary test node signals to True | |
Monitored value | ||
Source | 2TC03.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status | |
Description | Value at the control status node of 2TC03 | |
Evaluation details | ||
Success value | 1073741824 (2TC03 is in the "errorInputCompl" state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status to 1073741825 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.231 s |
Description | ||
---|---|---|
Reset 2TC03 to default state (state FALSE, outNO = 0, outNC = 1, send reset to both outputs and unlock the value) | ||
Action | ||
Command | 2TC03.test.reset | |
Description | Set detector 2TC03 reset test node to True | |
Monitored value | ||
Source | 2TC03.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status | |
Description | Value at the control status node of 2TC03 | |
Evaluation details | ||
Success value | 0 (2TC03 is reset) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.143 s |
Description | ||
---|---|---|
Set detector 2TC03 status to ERROR with the direct sensor value input | ||
Action | ||
Command | 2TC03.test.outNO.setFalse + 2TC03.test.outNC.setFalse | |
Description | Set both OutNO and OutNC complementary test node signals to False | |
Monitored value | ||
Source | 2TC03.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status | |
Description | Value at the control status node of 2TC03 | |
Evaluation details | ||
Success value | 1073741824 (2TC03 is in the "errorInputCompl" state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status to 1073741825 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.507 s |
Description | ||
---|---|---|
Reset 2TC03 to default state (state FALSE, outNO = 0, outNC = 1, send reset to both outputs and unlock the value) | ||
Action | ||
Command | 2TC03.test.reset | |
Description | Set detector 2TC03 reset test node to True | |
Monitored value | ||
Source | 2TC03.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status | |
Description | Value at the control status node of 2TC03 | |
Evaluation details | ||
Success value | 0 (2TC03 is reset) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC03.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.001 s |
Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to False |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.198 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Zone.status to 514 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.120 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.085 s |
Description | ||
---|---|---|
Activate detector 2TC04 and check if it has been occupied | ||
Action | ||
Command | 2TC04.test.set_true() | |
Description | Write "True" to the test node "setTrue" of detector 2TC04 | |
Monitored value | ||
Source | 2TC04.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status | |
Description | Value at the control status node of detector 2TC04 | |
Evaluation details | ||
Success value | 1 (detector 2TC04 has switched to the OCCUPIED state) | |
Error value | 536870912 (detector 2TC04 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 0'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status to 1 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 2.121 s |
Description | ||
---|---|---|
Deactivate detector 2TC04 and check if it has been released | ||
Action | ||
Command | 2TC04.test.set_false() | |
Description | Write "True" to the test node "setFalse" of detector 2TC04 | |
Monitored value | ||
Source | 2TC04.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status | |
Description | Value at the control status node of detector 2TC04 | |
Evaluation details | ||
Success value | 0 (detector 2TC04 has switched to the FREE state) | |
Error value | 536870912 (detector 2TC04 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 1'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | evaluated "register_release" on_success function | |
---|---|---|
description | register_release | |
result | None |
event | Test passed | |
---|---|---|
duration | 2.007 s |
Description | ||
---|---|---|
Activate detector 2TC04 and check if it has been occupied | ||
Action | ||
Command | 2TC04.test.set_true() | |
Description | Write "True" to the test node "setTrue" of detector 2TC04 | |
Monitored value | ||
Source | 2TC04.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status | |
Description | Value at the control status node of detector 2TC04 | |
Evaluation details | ||
Success value | 1 (detector 2TC04 has switched to the OCCUPIED state) | |
Error value | 536870912 (detector 2TC04 has switched to the ERROR state) | |
Check mode | Equal to | |
Mask | 0b1 | |
Require data change | True | |
Timeout | 4 | |
Custom error conditions | ['Detector status CLAIMED bit is 0'] |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status to 1 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.608 s |
Description | ||
---|---|---|
Set detector 2TC04 status to ERROR with the direct sensor value input | ||
Action | ||
Command | 2TC04.test.outNO.setTrue + 2TC04.test.outNC.setTrue | |
Description | Set both OutNO and OutNC complementary test node signals to True | |
Monitored value | ||
Source | 2TC04.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status | |
Description | Value at the control status node of 2TC04 | |
Evaluation details | ||
Success value | 1073741824 (2TC04 is in the "errorInputCompl" state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status to 1073741825 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.408 s |
Description | ||
---|---|---|
Reset 2TC04 to default state (state FALSE, outNO = 0, outNC = 1, send reset to both outputs and unlock the value) | ||
Action | ||
Command | 2TC04.test.reset | |
Description | Set detector 2TC04 reset test node to True | |
Monitored value | ||
Source | 2TC04.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status | |
Description | Value at the control status node of 2TC04 | |
Evaluation details | ||
Success value | 0 (2TC04 is reset) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.112 s |
Description | ||
---|---|---|
Set detector 2TC04 status to ERROR with the direct sensor value input | ||
Action | ||
Command | 2TC04.test.outNO.setFalse + 2TC04.test.outNC.setFalse | |
Description | Set both OutNO and OutNC complementary test node signals to False | |
Monitored value | ||
Source | 2TC04.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status | |
Description | Value at the control status node of 2TC04 | |
Evaluation details | ||
Success value | 1073741824 (2TC04 is in the "errorInputCompl" state) | |
Check mode | Equal to | |
Mask | 0b1000000000000000000000000000000 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status to 1073741825 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1073741824 | |
expected_value | 1073741824 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.268 s |
Description | ||
---|---|---|
Reset 2TC04 to default state (state FALSE, outNO = 0, outNC = 1, send reset to both outputs and unlock the value) | ||
Action | ||
Command | 2TC04.test.reset | |
Description | Set detector 2TC04 reset test node to True | |
Monitored value | ||
Source | 2TC04.control.status | |
Server address | ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status | |
Description | Value at the control status node of 2TC04 | |
Evaluation details | ||
Success value | 0 (2TC04 is reset) | |
Check mode | Equal to | |
Mask | 0b10 | |
Require data change | True | |
Timeout | 10 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Detector.TrackCircuit.TC04.status to 0 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 0 | |
expected_value | 0 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 1.188 s |
Description | ||
---|---|---|
Reset the test functions of the elements | ||
Action | ||
Command | Z02:OPCTest.System.resetAll | |
Description | Set the System.resetAll test node to True | |
Monitored value | ||
Source | Z02:OPCTest.System.resetAll | |
Server address | ns=6;s=::Z02:OPCTest.System.resetAll | |
Description | Value at the "resetAll" test node of the System | |
Evaluation details | ||
Success value | False (Register a datachange False (init) -> True -> False) | |
Check mode | Equal to | |
Require data change | True | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to True |
---|
event | datachange event at ns=6;s=::Z02:OPCTest.System.resetAll to False |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | False | |
expected_value | False | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.207 s |
Description | ||
---|---|---|
set Zone Z02 to the AB state | ||
Action | ||
Command | Z02.control.cmdSetAB | |
Description | set Zone Z02 cmdSetAB control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 2 (Zone Z02 is in the AB state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | datachange event at ns=6;s=::Z02:OPC.Zone.status to 514 |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 2 | |
expected_value | 2 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.147 s |
Description | ||
---|---|---|
set Zone Z02 to the NORM state | ||
Action | ||
Command | Z02.control.cmdSetNORM | |
Description | set Zone Z02 cmdSetNORM control node to True | |
Monitored value | ||
Source | Z02.control.status | |
Server address | ns=6;s=::Z02:OPC.Zone.status | |
Description | Value at the control status node of Zone Z02 | |
Evaluation details | ||
Success value | 1 (Zone Z02 is in the NORM state) | |
Check mode | Equal to | |
Mask | 0b11 | |
Timeout | 2 |
event | Test started running |
---|
event | Test started evaluation |
---|
event | Value check | |
---|---|---|
value | 1 | |
expected_value | 1 | |
value_match | True |
event | Test passed | |
---|---|---|
duration | 0.067 s |